Skip to content
ATO Pathways
  Log In

DISA STIG with GUI for Red Hat Enterprise Linux 9

Rules and Groups employed by this XCCDF Profile

  • Enable Kernel Page-Table Isolation (KPTI)

    To enable Kernel page-table isolation, add the argument <code>pti=on</code> to the default GRUB 2 command line for the Linux operating system. To e...
    Rule Low Severity
    Show

  • Disable vsyscalls

    To disable use of virtual syscalls, add the argument <code>vsyscall=none</code> to the default GRUB 2 command line for the Linux operating system. ...
    Rule Medium Severity
    Show

  • Non-UEFI GRUB2 bootloader configuration

    Non-UEFI GRUB2 bootloader configuration
    Group
    Show

  • Verify /boot/grub2/grub.cfg Group Ownership

    The file <code>/boot/grub2/grub.cfg</code> should be group-owned by the <code>root</code> group to prevent destruction or modification of the file....
    Rule Medium Severity
    Show

  • Verify /boot/grub2/grub.cfg User Ownership

    The file <code>/boot/grub2/grub.cfg</code> should be owned by the <code>root</code> user to prevent destruction or modification of the file. To pr...
    Rule Medium Severity
    Show

  • Set the Boot Loader Admin Username to a Non-Default Value

    The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings. <br><br> To maximize the prote...
    Rule High Severity
    Show

  • Set Boot Loader Password in grub2

    The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings. <br><br> Since plaintext passw...
    Rule High Severity
    Show

  • Configure Syslog

    The syslog service has been the default Unix logging mechanism for many years. It has a number of downsides, including inconsistent log format, lac...
    Group
    Show

  • Ensure rsyslog-gnutls is installed

    TLS protocol support for rsyslog is installed. The <code>rsyslog-gnutls</code> package can be installed with the following command: <pre> $ sudo d...
    Rule Medium Severity
    Show

  • Ensure rsyslog is Installed

    Rsyslog is installed by default. The rsyslog package can be installed with the following command: 
     $ sudo dnf install rsyslog
    Rule Medium Severity
    Show

  • Enable rsyslog Service

    The <code>rsyslog</code> service provides syslog-style logging by default on Red Hat Enterprise Linux 9. The <code>rsyslog</code> service can be e...
    Rule Medium Severity
    Show

  • Ensure Proper Configuration of Log Files

    The file <code>/etc/rsyslog.conf</code> controls where log message are written. These are controlled by lines called <i>rules</i>, which consist of...
    Group
    Show

  • Ensure cron Is Logging To Rsyslog

    Cron logging must be implemented to spot intrusions or trace cron job status. If <code>cron</code> is not logging to <code>rsyslog</code>, it can b...
    Rule Medium Severity
    Show

  • Ensure Rsyslog Authenticates Off-Loaded Audit Records

    Rsyslogd is a system utility providing support for message logging. Support for both internet and UNIX domain sockets enables this utility to suppo...
    Rule Medium Severity
    Show

  • Ensure Rsyslog Encrypts Off-Loaded Audit Records

    Rsyslogd is a system utility providing support for message logging. Support for both internet and UNIX domain sockets enables this utility to suppo...
    Rule Medium Severity
    Show

  • Ensure Rsyslog Encrypts Off-Loaded Audit Records

    Rsyslogd is a system utility providing support for message logging. Support for both internet and UNIX domain sockets enables this utility to suppo...
    Rule Medium Severity
    Show

  • Ensure remote access methods are monitored in Rsyslog

    Logging of remote access methods must be implemented to help identify cyber attacks and ensure ongoing compliance with remote access policies are b...
    Rule Medium Severity
    Show

  • systemd-journald

    systemd-journald is a system service that collects and stores logging data. It creates and maintains structured, indexed journals based on logging ...
    Group
    Show

  • Enable systemd-journald Service

    The <code>systemd-journald</code> service is an essential component of systemd. The <code>systemd-journald</code> service can be enabled with the ...
    Rule Medium Severity
    Show

  • Configure rsyslogd to Accept Remote Messages If Acting as a Log Server

    By default, <code>rsyslog</code> does not listen over the network for log messages. If needed, modules can be enabled to allow the rsyslog daemon t...
    Group
    Show

  • Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server

    The <code>rsyslog</code> daemon should not accept remote messages unless the system acts as a log server. To ensure that it is not listening on the...
    Rule Medium Severity
    Show

  • Rsyslog Logs Sent To Remote Host

    If system logs are to be useful in detecting malicious activities, it is necessary to send logs to a remote server. An intruder who has compromised...
    Group
    Show

  • Ensure Logs Sent To Remote Host

    To configure rsyslog to send logs to a remote log server, open <code>/etc/rsyslog.conf</code> and read and understand the last section of the file,...
    Rule Medium Severity
    Show

  • Network Configuration and Firewalls

    Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses th...
    Group
    Show

  • Configure Multiple DNS Servers in /etc/resolv.conf

    Determine whether the system is using local or DNS name resolution with the following command: <pre>$ sudo grep hosts /etc/nsswitch.conf hosts: fi...
    Rule Medium Severity
    Show

  • Ensure System is Not Acting as a Network Sniffer

    The system should not be acting as a network sniffer, which can capture all traffic on the network to which it is connected. Run the following to d...
    Rule Medium Severity
    Show

  • firewalld

    The dynamic firewall daemon <code>firewalld</code> provides a dynamically managed firewall with support for network “zones” to assign a level of tr...
    Group
    Show

  • Configure Firewalld to Use the Nftables Backend

    Firewalld can be configured with many backends, such as nftables.
    Rule Medium Severity
    Show

  • Inspect and Activate Default firewalld Rules

    Firewalls can be used to separate networks into different zones based on the level of trust the user has decided to place on the devices and traffi...
    Group
    Show

  • Install firewalld Package

    The firewalld package can be installed with the following command: 
    $ sudo dnf install firewalld
    Rule Medium Severity
    Show

  • Verify firewalld Enabled

    The firewalld service can be enabled with the following command: 
    $ sudo systemctl enable firewalld.service
    Rule Medium Severity
    Show

  • Strengthen the Default Ruleset

    The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in configuration files under t...
    Group
    Show

  • Configure the Firewalld Ports

    Configure the <code>firewalld</code> ports to allow approved services to have access to the system. To configure <code>firewalld</code> to open por...
    Rule Medium Severity
    Show

  • Firewalld Must Employ a Deny-all, Allow-by-exception Policy for Allowing Connections to Other Systems

    Red Hat Enterprise Linux 9 incorporates the "firewalld" daemon, which allows for many different configurations. One of these configurations is zone...
    Rule Medium Severity
    Show

  • IPSec Support

    Support for Internet Protocol Security (IPsec) is provided with Libreswan.
    Group
    Show

  • Install libreswan Package

    The libreswan package provides an implementation of IPsec and IKE, which permits the creation of secure tunnels over untrusted networks. The <code>...
    Rule Medium Severity
    Show

  • Verify Any Configured IPSec Tunnel Connections

    Libreswan provides an implementation of IPsec and IKE, which permits the creation of secure tunnels over untrusted networks. As such, IPsec can be ...
    Rule Medium Severity
    Show

  • IPv6

    The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the numb...
    Group
    Show

  • Configure IPv6 Settings if Necessary

    A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from ...
    Group
    Show

  • Configure Accepting Router Advertisements on All IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_ra</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ip...
    Rule Medium Severity
    Show

  • Disable Accepting ICMP Redirects for All IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for IPv6 Forwarding

    To set the runtime status of the <code>net.ipv6.conf.all.forwarding</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.i...
    Rule Medium Severity
    Show

  • Disable Accepting Router Advertisements on all IPv6 Interfaces by Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_ra</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w ne...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysct...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sy...
    Rule Medium Severity
    Show

  • Kernel Parameters Which Affect Networking

    The <code>sysctl</code> utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking...
    Group
    Show

  • Network Related Kernel Runtime Parameters for Hosts and Routers

    Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against cert...
    Group
    Show

  • Disable Accepting ICMP Redirects for All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules