Skip to content
Log In

CIS Red Hat Enterprise Linux 7 Benchmark for Level 1 - Server

Rules and Groups employed by this XCCDF Profile

  • FTP Server

    FTP is a common method for allowing remote access to files. Like telnet, the FTP protocol is unencrypted, which means that passwords and other data transmitted during the session can be captured an...
    Group
    Show

  • Disable vsftpd if Possible

    To minimize attack surface, disable vsftpd if at all possible.
    Group
    Show

  • Uninstall vsftpd Package

    The vsftpd package can be removed with the following command: 
     $ sudo yum erase vsftpd
    Rule High Severity
    Show

  • Web Server

    The web server is responsible for providing access to content via the HTTP protocol. Web servers represent a significant security risk because: <br><br> <ul> <li>The HTTP port is commonly probed by...
    Group
    Show

  • Disable Apache if Possible

    If Apache was installed and activated, but the system does not need to act as a web server, then it should be disabled and removed from the system.
    Group
    Show

  • Uninstall httpd Package

    The httpd package can be removed with the following command: 
    $ sudo yum erase httpd
    Rule Unknown Severity
    Show

  • Disable NGINX if Possible

    If NGINX was installed and activated, but the system does not need to act as a web server, then it should be removed from the system.
    Group
    Show

  • IMAP and POP3 Server

    Dovecot provides IMAP and POP3 services. It is not installed by default. The project page at <a href="http://www.dovecot.org">http://www.dovecot.org</a> contains more detailed information abou...
    Group
    Show

  • Disable Cyrus IMAP

    If the system does not need to operate as an IMAP or POP3 server, the Cyrus IMAP software should be removed.
    Group
    Show

  • Disable Dovecot

    If the system does not need to operate as an IMAP or POP3 server, the dovecot software should be disabled and removed.
    Group
    Show

  • Uninstall dovecot Package

    The dovecot package can be removed with the following command: 
    $ sudo yum erase dovecot
    Rule Unknown Severity
    Show

  • Mail Server Software

    Mail servers are used to send and receive email over the network. Mail is a very common service, and Mail Transfer Agents (MTAs) are obvious targets of network attack. Ensure that systems are not r...
    Group
    Show

  • Ensure Mail Transfer Agent is not Listening on any non-loopback Address

    Mail Transfer Agents (MTA), such as sendmail and Postfix, are used to listen for incoming mail and transfer the messages to the appropriate user or mail server. If the system is not intended to be ...
    Rule Medium Severity
    Show

  • Configure SMTP For Mail Clients

    This section discusses settings for Postfix in a submission-only e-mail configuration.
    Group
    Show

  • Disable Postfix Network Listening

    Edit the file <code>/etc/postfix/main.cf</code> to ensure that only the following <code>inet_interfaces</code> line appears: <pre>inet_interfaces = <xccdf-1.2:sub idref="xccdf_org.ssgproject.conten...
    Rule Medium Severity
    Show

  • NFS and RPC

    The Network File System is a popular distributed filesystem for the Unix environment, and is very widely deployed. This section discusses the circumstances under which it is possible to disable NF...
    Group
    Show

  • Disable All NFS Services if Possible

    If there is not a reason for the system to operate as either an NFS client or an NFS server, follow all instructions in this section to disable subsystems required by NFS.
    Group
    Show

  • Disable Services Used Only by NFS

    If NFS is not needed, disable the NFS client daemons nfslock, rpcgssd, and rpcidmapd. <br><br> All of these daemons run with elevated privileges, and many listen for network connections. If they ar...
    Group
    Show

  • Disable rpcbind Service

    The rpcbind utility maps RPC services to the ports on which they listen. RPC processes notify rpcbind when they start, registering the ports they are listening on and the RPC program numbers they e...
    Rule Low Severity
    Show

  • Configure NFS Clients

    The steps in this section are appropriate for systems which operate as NFS clients.
    Group
    Show

  • Disable NFS Server Daemons

    There is no need to run the NFS server daemons <code>nfs</code> and <code>rpcsvcgssd</code> except on a small number of properly secured systems designated as NFS servers. Ensure that these daemons...
    Group
    Show

  • Disable Network File System (nfs)

    The Network File System (NFS) service allows remote hosts to mount and interact with shared filesystems on the local system. If the local system is not designated as a NFS server then this service ...
    Rule Unknown Severity
    Show

  • Network Time Protocol

    The Network Time Protocol is used to manage the system clock over a network. Computer clocks are not very accurate, so time will drift unpredictably on unmanaged systems. Central time protocols can...
    Group
    Show

  • The Chrony package is installed

    System time should be synchronized between all systems in an environment. This is typically done by establishing an authoritative time server or set of servers and having all systems synchronize th...
    Rule Medium Severity
    Show

  • Ensure that chronyd is running under chrony user account

    chrony is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More informati...
    Rule Medium Severity
    Show

  • A remote time server for Chrony is configured

    <code>Chrony</code> is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. M...
    Rule Medium Severity
    Show

  • Obsolete Services

    This section discusses a number of network-visible services which have historically caused problems for system security, and for which disabling or severely limiting the service has been the best a...
    Group
    Show

  • Uninstall rsync Package

    The rsyncd service can be used to synchronize files between systems over network links. The rsync package can be removed with the following command: 
    $ sudo yum erase rsync
    Rule Medium Severity
    Show

  • Xinetd

    The <code>xinetd</code> service acts as a dedicated listener for some network services (mostly, obsolete ones) and can be used to provide access controls and perform some logging. It has been large...
    Group
    Show

  • Uninstall xinetd Package

    The xinetd package can be removed with the following command: 
    $ sudo yum erase xinetd
    Rule Low Severity
    Show

  • NIS

    The Network Information Service (NIS), also known as 'Yellow Pages' (YP), and its successor NIS+ have been made obsolete by Kerberos, LDAP, and other modern centralized authentication services. NIS...
    Group
    Show

  • Remove NIS Client

    The Network Information Service (NIS), formerly known as Yellow Pages, is a client-server directory service protocol used to distribute system configuration files. The NIS client (<code>ypbind</cod...
    Rule Unknown Severity
    Show

  • Uninstall ypserv Package

    The ypserv package can be removed with the following command: 
    $ sudo yum erase ypserv
    Rule High Severity
    Show

  • Rlogin, Rsh, and Rexec

    The Berkeley r-commands are legacy services which allow cleartext remote access and have an insecure trust model.
    Group
    Show

  • Remove Rsh Trust Files

    The files <code>/etc/hosts.equiv</code> and <code>~/.rhosts</code> (in each user's home directory) list remote hosts and users that are trusted by the local system when using the rshd daemon. To re...
    Rule High Severity
    Show

  • Telnet

    The telnet protocol does not provide confidentiality or integrity for information transmitted on the network. This includes authentication information such as passwords. Organizations which use tel...
    Group
    Show

  • Uninstall telnet-server Package

    The telnet-server package can be removed with the following command: 
    $ sudo yum erase telnet-server
    Rule High Severity
    Show

  • Remove telnet Clients

    The telnet client allows users to start connections to other systems via the telnet protocol.
    Rule Low Severity
    Show

  • TFTP Server

    TFTP is a lightweight version of the FTP protocol which has traditionally been used to configure networking equipment. However, TFTP provides little security, and modern versions of networking oper...
    Group
    Show

  • Uninstall tftp-server Package

    The tftp-server package can be removed with the following command: 
     $ sudo yum erase tftp-server
    Rule High Severity
    Show

  • Remove tftp Daemon

    Trivial File Transfer Protocol (TFTP) is a simple file transfer protocol, typically used to automatically transfer configuration or boot files between systems. TFTP does not support authentication ...
    Rule Low Severity
    Show

  • Print Support

    The Common Unix Printing System (CUPS) service provides both local and network printing support. A system running the CUPS service can accept print jobs from other systems, process them, and send t...
    Group
    Show

  • Uninstall CUPS Package

    The cups package can be removed with the following command: 
    $ sudo yum erase cups
    Rule Unknown Severity
    Show

  • Proxy Server

    A proxy server is a very desirable target for a potential adversary because much (or all) sensitive data for a given infrastructure may flow through it. Therefore, if one is required, the system ac...
    Group
    Show

  • Disable Squid if Possible

    If Squid was installed and activated, but the system does not need to act as a proxy server, then it should be disabled and removed.
    Group
    Show

  • Uninstall squid Package

    The squid package can be removed with the following command: 
     $ sudo yum erase squid
    Rule Unknown Severity
    Show

  • Samba(SMB) Microsoft Windows File Sharing Server

    When properly configured, the Samba service allows Linux systems to provide file and print sharing to Microsoft Windows systems. There are two software packages that provide Samba support. The firs...
    Group
    Show

  • Disable Samba if Possible

    Even after the Samba server package has been installed, it will remain disabled. Do not enable this service unless it is absolutely necessary to provide Microsoft Windows file and print sharing fun...
    Group
    Show

  • Uninstall Samba Package

    The samba package can be removed with the following command: 
     $ sudo yum erase samba
    Rule Unknown Severity
    Show

  • SNMP Server

    The Simple Network Management Protocol allows administrators to monitor the state of network devices, including computers. Older versions of SNMP were well-known for weak security, such as plaintex...
    Group
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules