Skip to content
Log In

ANSSI-BP-028 (intermediary)

Rules and Groups employed by this XCCDF Profile

  • Add nosuid Option to /opt

    The <code>nosuid</code> mount option can be used to prevent execution of setuid programs in <code>/opt</code>. The SUID and SGID permissions should not be required in this directory. Add the <code>...
    Rule Medium Severity
    Show

  • Add nosuid Option to /srv

    The <code>nosuid</code> mount option can be used to prevent execution of setuid programs in <code>/srv</code>. The SUID and SGID permissions should not be required in this directory. Add the <code>...
    Rule Medium Severity
    Show

  • Add noexec Option to /tmp

    The <code>noexec</code> mount option can be used to prevent binaries from being executed out of <code>/tmp</code>. Add the <code>noexec</code> option to the fourth column of <code>/etc/fstab</code>...
    Rule Medium Severity
    Show

  • Add nosuid Option to /tmp

    The <code>nosuid</code> mount option can be used to prevent execution of setuid programs in <code>/tmp</code>. The SUID and SGID permissions should not be required in these world-writable directori...
    Rule Medium Severity
    Show

  • Add noexec Option to /var/log

    The <code>noexec</code> mount option can be used to prevent binaries from being executed out of <code>/var/log</code>. Add the <code>noexec</code> option to the fourth column of <code>/etc/fstab</c...
    Rule Medium Severity
    Show

  • Add nosuid Option to /var/log

    The <code>nosuid</code> mount option can be used to prevent execution of setuid programs in <code>/var/log</code>. The SUID and SGID permissions should not be required in directories containing log...
    Rule Medium Severity
    Show

  • Add noexec Option to /var

    The <code>noexec</code> mount option can be used to prevent binaries from being executed out of <code>/var</code>. Add the <code>noexec</code> option to the fourth column of <code>/etc/fstab</code>...
    Rule Medium Severity
    Show

  • Add nosuid Option to /var

    The <code>nosuid</code> mount option can be used to prevent execution of setuid programs in <code>/var</code>. The SUID and SGID permissions should not be required for this directory. Add the <code...
    Rule Medium Severity
    Show

  • Add noexec Option to /var/tmp

    The <code>noexec</code> mount option can be used to prevent binaries from being executed out of <code>/var/tmp</code>. Add the <code>noexec</code> option to the fourth column of <code>/etc/fstab</c...
    Rule Medium Severity
    Show

  • Add nosuid Option to /var/tmp

    The <code>nosuid</code> mount option can be used to prevent execution of setuid programs in <code>/var/tmp</code>. The SUID and SGID permissions should not be required in these world-writable direc...
    Rule Medium Severity
    Show

  • Restrict Programs from Dangerous Execution Patterns

    The recommendations in this section are designed to ensure that the system's features to protect against potentially dangerous program execution are activated. These protections are applied at the ...
    Group
    Show

  • Restrict Access to Kernel Message Buffer

    To set the runtime status of the <code>kernel.dmesg_restrict</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.dmesg_restrict=1</pre> To make sure that the setting is...
    Rule Low Severity
    Show

  • Kernel panic on oops

    To set the runtime status of the <code>kernel.panic_on_oops</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.panic_on_oops=1</pre> To make sure that the setting is p...
    Rule Medium Severity
    Show

  • Limit CPU consumption of the Perf system

    To set the runtime status of the <code>kernel.perf_cpu_time_max_percent</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.perf_cpu_time_max_percent=1</pre> To make su...
    Rule Medium Severity
    Show

  • Limit sampling frequency of the Perf system

    To set the runtime status of the <code>kernel.perf_event_max_sample_rate</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.perf_event_max_sample_rate=1</pre> To make ...
    Rule Medium Severity
    Show

  • Disallow kernel profiling by unprivileged users

    To set the runtime status of the <code>kernel.perf_event_paranoid</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.perf_event_paranoid=2</pre> To make sure that the ...
    Rule Low Severity
    Show

  • Configure maximum number of process identifiers

    To set the runtime status of the <code>kernel.pid_max</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.pid_max=65536</pre> To make sure that the setting is persisten...
    Rule Medium Severity
    Show

  • Disallow magic SysRq key

    To set the runtime status of the <code>kernel.sysrq</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.sysrq=0</pre> To make sure that the setting is persistent, add t...
    Rule Medium Severity
    Show

  • Restrict usage of ptrace to descendant processes

    To set the runtime status of the <code>kernel.yama.ptrace_scope</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.yama.ptrace_scope=1</pre> To make sure that the sett...
    Rule Medium Severity
    Show

  • Prevent applications from mapping low portion of virtual memory

    To set the runtime status of the <code>vm.mmap_min_addr</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w vm.mmap_min_addr=65536</pre> To make sure that the setting is persi...
    Rule Medium Severity
    Show

  • Disable Core Dumps

    A core dump file is the memory image of an executable program when it was terminated by the operating system due to errant behavior. In most cases, only software developers legitimately need to acc...
    Group
    Show

  • Disable Core Dumps for SUID programs

    To set the runtime status of the <code>fs.suid_dumpable</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.suid_dumpable=0</pre> To make sure that the setting is persisten...
    Rule Medium Severity
    Show

  • Enable ExecShield

    ExecShield describes kernel features that provide protection against exploitation of memory corruption errors such as buffer overflows. These features include random placement of the stack and othe...
    Group
    Show

  • Restrict Exposed Kernel Pointer Addresses Access

    To set the runtime status of the <code>kernel.kptr_restrict</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.kptr_restrict=<xccdf-1.2:sub idref="xccdf_org.ssgproject...
    Rule Medium Severity
    Show

  • Enable Randomized Layout of Virtual Address Space

    To set the runtime status of the <code>kernel.randomize_va_space</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.randomize_va_space=2</pre> To make sure that the se...
    Rule Medium Severity
    Show

  • Memory Poisoning

    Memory Poisoning consists of writing a special value to uninitialized or freed memory. Poisoning can be used as a mechanism to prevent leak of information and detection of corrupted memory.
    Group
    Show

  • Enable page allocator poisoning

    To enable poisoning of free pages, add the argument <code>page_poison=1</code> to the default GRUB 2 command line for the Linux operating system. To ensure that <code>page_poison=1</code> is added ...
    Rule Medium Severity
    Show

  • Enable SLUB/SLAB allocator poisoning

    To enable poisoning of SLUB/SLAB objects, add the argument <code>slub_debug=<xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_slub_debug_options" use="legacy"></xccdf-1.2:sub></code> to ...
    Rule Medium Severity
    Show

  • SELinux

    SELinux is a feature of the Linux kernel which can be used to guard against misconfigured or compromised programs. SELinux enforces the idea that programs should be limited in what files they can a...
    Group
    Show

  • Ensure SELinux State is Enforcing

    The SELinux state should be set to <code><xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_selinux_state" use="legacy"></xccdf-1.2:sub></code> at system boot time. In the file <code>/et...
    Rule High Severity
    Show

  • SELinux - Booleans

    Enable or Disable runtime customization of SELinux system policies without having to reload or recompile the SELinux policy.
    Group
    Show

  • Configure the polyinstantiation_enabled SELinux Boolean

    By default, the SELinux boolean <code>polyinstantiation_enabled</code> is disabled. This setting should be configured to <xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_polyinstantiati...
    Rule Medium Severity
    Show

  • Services

    The best protection against vulnerable software is running less software. This section describes how to review the software which Red Hat Enterprise Linux 7 installs on a system and disable softwar...
    Group
    Show

  • DHCP

    The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server. <br><br> This guide recommends configuring networ...
    Group
    Show

  • Disable DHCP Server

    The DHCP server <code>dhcpd</code> is not installed or activated by default. If the software was installed and activated, but the system does not need to act as a DHCP server, it should be disabled...
    Group
    Show

  • Uninstall DHCP Server Package

    If the system does not need to act as a DHCP server, the dhcp package can be uninstalled. The dhcp package can be removed with the following command: 
    $ sudo yum erase dhcp
    Rule Medium Severity
    Show

  • Mail Server Software

    Mail servers are used to send and receive email over the network. Mail is a very common service, and Mail Transfer Agents (MTAs) are obvious targets of network attack. Ensure that systems are not r...
    Group
    Show

  • Uninstall Sendmail Package

    Sendmail is not the default mail transfer agent and is not installed by default. The sendmail package can be removed with the following command: 
    $ sudo yum erase sendmail
    Rule Medium Severity
    Show

  • Configure SMTP For Mail Clients

    This section discusses settings for Postfix in a submission-only e-mail configuration.
    Group
    Show

  • Configure System to Forward All Mail For The Root Account

    Make sure that mails delivered to root user are forwarded to a monitored email address. Make sure that the address <xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_postfix_root_mail_ali...
    Rule Medium Severity
    Show

  • Disable Postfix Network Listening

    Edit the file <code>/etc/postfix/main.cf</code> to ensure that only the following <code>inet_interfaces</code> line appears: <pre>inet_interfaces = <xccdf-1.2:sub idref="xccdf_org.ssgproject.conten...
    Rule Medium Severity
    Show

  • Obsolete Services

    This section discusses a number of network-visible services which have historically caused problems for system security, and for which disabling or severely limiting the service has been the best a...
    Group
    Show

  • Xinetd

    The <code>xinetd</code> service acts as a dedicated listener for some network services (mostly, obsolete ones) and can be used to provide access controls and perform some logging. It has been large...
    Group
    Show

  • Uninstall xinetd Package

    The xinetd package can be removed with the following command: 
    $ sudo yum erase xinetd
    Rule Low Severity
    Show

  • NIS

    The Network Information Service (NIS), also known as 'Yellow Pages' (YP), and its successor NIS+ have been made obsolete by Kerberos, LDAP, and other modern centralized authentication services. NIS...
    Group
    Show

  • Remove NIS Client

    The Network Information Service (NIS), formerly known as Yellow Pages, is a client-server directory service protocol used to distribute system configuration files. The NIS client (<code>ypbind</cod...
    Rule Unknown Severity
    Show

  • Uninstall ypserv Package

    The ypserv package can be removed with the following command: 
    $ sudo yum erase ypserv
    Rule High Severity
    Show

  • Rlogin, Rsh, and Rexec

    The Berkeley r-commands are legacy services which allow cleartext remote access and have an insecure trust model.
    Group
    Show

  • Uninstall rsh-server Package

    The rsh-server package can be removed with the following command: 
    $ sudo yum erase rsh-server
    Rule High Severity
    Show

  • Uninstall rsh Package

    The rsh package contains the client commands for the rsh services
    Rule Unknown Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules