DISA STIG with GUI for Oracle Linux 8
Rules and Groups employed by this XCCDF Profile
-
Disable Accepting Router Advertisements on all IPv6 Interfaces by Default
To set the runtime status of the <code>net.ipv6.conf.default.accept_ra</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w ne...Rule Medium Severity -
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysct...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default
To set the runtime status of the <code>net.ipv6.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sy...Rule Medium Severity -
Kernel Parameters Which Affect Networking
The <code>sysctl</code> utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking...Group -
Network Related Kernel Runtime Parameters for Hosts and Routers
Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against cert...Group -
Disable Accepting ICMP Redirects for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl...Rule Medium Severity -
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.rp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ip...Rule Medium Severity -
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysct...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sy...Rule Medium Severity -
Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.icmp_echo_ignore_broadcasts</code> kernel parameter, run the following command: <pre>$ sudo sysctl ...Rule Medium Severity -
Network Parameters for Hosts Only
If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network ...Group -
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w n...Rule Medium Severity -
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl ...Rule Medium Severity -
Uncommon Network Protocols
The system includes support for several network protocols which are not commonly used. Although security vulnerabilities in kernel networking code ...Group -
Disable ATM Support
The Asynchronous Transfer Mode (ATM) is a protocol operating on network, data link, and physical layers, based on virtual circuits and virtual path...Rule Medium Severity -
Disable CAN Support
The Controller Area Network (CAN) is a serial communications protocol which was initially developed for automotive and is now also used in marine, ...Rule Medium Severity -
Disable IEEE 1394 (FireWire) Support
The IEEE 1394 (FireWire) is a serial bus standard for high-speed real-time communication. To configure the system to prevent the <code>firewire-co...Rule Low Severity -
Disable SCTP Support
The Stream Control Transmission Protocol (SCTP) is a transport layer protocol, designed to support the idea of message-oriented communication, with...Rule Medium Severity -
Disable TIPC Support
The Transparent Inter-Process Communication (TIPC) protocol is designed to provide communications between nodes in a cluster. To configure the sys...Rule Low Severity
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.