Skip to content

III - Administrative Sensitive

Rules and Groups employed by this XCCDF Profile

  • SRG-NET-000362-L2S-000026

    <GroupDescription></GroupDescription>
    Group
  • The HP FlexFabric Switch must have IP Source Guard enabled on all user-facing or untrusted access switch ports.

    &lt;VulnDiscussion&gt;IP Source Guard provides source IP address filtering on a Layer 2 port to prevent a malicious host from impersonating a legit...
    Rule Medium Severity
  • SRG-NET-000362-L2S-000027

    <GroupDescription></GroupDescription>
    Group
  • The HP FlexFabric Switch must have Dynamic ARP Inspection (DAI) enabled on all user VLANs.

    &lt;VulnDiscussion&gt;DAI intercepts Address Resolution Protocol (ARP) requests and verifies that each of these packets has a valid IP-to-MAC addre...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000003

    <GroupDescription></GroupDescription>
    Group
  • The HP FlexFabric Switch must implement Rapid STP where VLANs span multiple switches with redundant links.

    &lt;VulnDiscussion&gt;Spanning Tree Protocol (STP) is implemented on bridges and switches to prevent layer 2 loops when a broadcast domain spans mu...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000004

    <GroupDescription></GroupDescription>
    Group
  • The HP FlexFabric Switch must enable Device Link Detection Protocol (DLDP) to protect against one-way connections.

    &lt;VulnDiscussion&gt;In topologies where fiber optic interconnections are used, physical misconnections can occur that allow a link to appear to b...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000005

    <GroupDescription></GroupDescription>
    Group
  • The HP FlexFabric Switch must have all trunk links enabled statically.

    &lt;VulnDiscussion&gt;When trunk negotiation is enabled via Dynamic Trunk Protocol (DTP), considerable time can be spent negotiating trunk settings...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000007

    <GroupDescription></GroupDescription>
    Group
  • The HP FlexFabric Switch must have all disabled switch ports assigned an unused VLAN.

    &lt;VulnDiscussion&gt;It is possible that a disabled port that is assigned to a user or management VLAN becomes enabled by accident or by an attack...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000008

    <GroupDescription></GroupDescription>
    Group
  • The HP FlexFabric Switch must not have the default VLAN assigned to any host-facing switch ports.

    &lt;VulnDiscussion&gt;In a VLAN-based network, switches use the default VLAN (i.e., VLAN 1) for in-band management and to communicate with other ne...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000009

    <GroupDescription></GroupDescription>
    Group
  • The HP FlexFabric Switch must have the default VLAN pruned from all trunk ports that do not require it.

    &lt;VulnDiscussion&gt;The default VLAN (i.e., VLAN 1) is a special VLAN used for control plane traffic such as Spanning-Tree Protocol (STP), Dynami...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000010

    <GroupDescription></GroupDescription>
    Group
  • The HP FlexFabric Switch must not use the default VLAN for management traffic.

    &lt;VulnDiscussion&gt;Switches use the default VLAN (i.e., VLAN 1) for in-band management and to communicate with directly connected switches using...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000011

    <GroupDescription></GroupDescription>
    Group
  • The HP FlexFabric Switch must have all user-facing or untrusted ports configured as access switch ports.

    &lt;VulnDiscussion&gt;Double encapsulation can be initiated by an attacker who has access to a switch port belonging to the native VLAN of the trun...
    Rule Medium Severity

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules