Skip to content
Log In

III - Administrative Classified

Rules and Groups employed by this XCCDF Profile

  • SRG-NET-000362-L2S-000026

    Group
    Show

  • The HP FlexFabric Switch must have IP Source Guard enabled on all user-facing or untrusted access switch ports.

    IP Source Guard provides source IP address filtering on a Layer 2 port to prevent a malicious host from impersonating a legitimate host by assuming the legitimate host's IP address. The feature use...
    Rule Medium Severity
    Show

  • SRG-NET-000362-L2S-000027

    Group
    Show

  • The HP FlexFabric Switch must have Dynamic ARP Inspection (DAI) enabled on all user VLANs.

    DAI intercepts Address Resolution Protocol (ARP) requests and verifies that each of these packets has a valid IP-to-MAC address binding before updating the local ARP cache and before forwarding the...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000003

    Group
    Show

  • The HP FlexFabric Switch must implement Rapid STP where VLANs span multiple switches with redundant links.

    Spanning Tree Protocol (STP) is implemented on bridges and switches to prevent layer 2 loops when a broadcast domain spans multiple bridges and switches and when redundant links are provisioned to ...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000004

    Group
    Show

  • The HP FlexFabric Switch must enable Device Link Detection Protocol (DLDP) to protect against one-way connections.

    In topologies where fiber optic interconnections are used, physical misconnections can occur that allow a link to appear to be up when there is a mismatched set of transmit/receive pairs. When such...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000005

    Group
    Show

  • The HP FlexFabric Switch must have all trunk links enabled statically.

    When trunk negotiation is enabled via Dynamic Trunk Protocol (DTP), considerable time can be spent negotiating trunk settings (802.1q or ISL) when a node or interface is restored. While this negoti...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules