Skip to content
Log In

Guide to the Secure Configuration of OpenEmbedded

Rules, Groups, and Values defined within the XCCDF Benchmark

  • Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.all.accept_source_route=0</pre> ...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for IPv6 Forwarding

    To set the runtime status of the <code>net.ipv6.conf.all.forwarding</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.all.forwarding=0</pre> To make sure that ...
    Rule Medium Severity
    Show

  • Disable Accepting Router Advertisements on all IPv6 Interfaces by Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_ra</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.default.accept_ra=0</pre> To make sure...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.default.accept_redirects=0</pre...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.default.accept_source_route=...
    Rule Medium Severity
    Show

  • Disable Accepting Packets Routed Between Local Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.accept_local</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_local=0</pre> To make sure t...
    Rule Medium Severity
    Show

  • Disable Accepting ICMP Redirects for All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0</pre> To mak...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0</pre> ...
    Rule Medium Severity
    Show

  • Configure ARP filtering for All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.arp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.arp_filter=<xccdf-1.2:sub idref="xccd...
    Rule Medium Severity
    Show

  • Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.log_martians</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.log_martians=1</pre> To make sure t...
    Rule Unknown Severity
    Show

  • Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.rp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.rp_filter=1</pre> To make sure that th...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Secure ICMP Redirects on all IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.secure_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.secure_redirects=0</pre> To mak...
    Rule Medium Severity
    Show

  • Configure Sending and Accepting Shared Media Redirects for All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.shared_media=<xccdf-1.2:sub idref="...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.accept_redirects=0</pre...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default

    To set the runtime status of the <code>net.ipv4.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=...
    Rule Medium Severity
    Show

  • Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Default

    To set the runtime status of the <code>net.ipv4.conf.default.log_martians</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.log_martians=1</pre> To mak...
    Rule Unknown Severity
    Show

  • Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Default

    To set the runtime status of the <code>net.ipv4.conf.default.rp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.rp_filter=1</pre> To make sure...
    Rule Medium Severity
    Show

  • Configure Kernel Parameter for Accepting Secure Redirects By Default

    To set the runtime status of the <code>net.ipv4.conf.default.secure_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.secure_redirects=0</pre...
    Rule Medium Severity
    Show

  • Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.icmp_echo_ignore_broadcasts</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1</pre> To...
    Rule Medium Severity
    Show

  • Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.icmp_ignore_bogus_error_responses</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.icmp_ignore_bogus_error_response...
    Rule Unknown Severity
    Show

  • Enable Kernel Parameter to Use TCP Syncookies on Network Interfaces

    To set the runtime status of the <code>net.ipv4.tcp_syncookies</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.tcp_syncookies=1</pre> To make sure that the settin...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0</pre> To make su...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default

    To set the runtime status of the <code>net.ipv4.conf.default.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0</pre> To...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for IP Forwarding on IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.ip_forward</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.ip_forward=0</pre> To make sure that the setting is per...
    Rule Medium Severity
    Show

  • Verify ufw Enabled

    The ufw service can be enabled with the following command: 
    $ sudo systemctl enable ufw.service
    Rule Medium Severity
    Show

  • Wireless Networking

    Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless networking hardware is much more likely to be include...
    Group
    Show

  • Deactivate Wireless Network Interfaces

    Deactivating wireless network interfaces should prevent normal usage of the wireless capability. <br> <br> Configure the system to disable all wireless network interfaces with the followi...
    Rule Medium Severity
    Show

  • Verify that All World-Writable Directories Have Sticky Bits Set

    When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may ...
    Rule Medium Severity
    Show

  • Ensure All Files Are Owned by a Group

    If any file is not group-owned by a group present in /etc/group, the cause of the lack of group-ownership must be investigated. Following this, those files should be deleted or assigned to an appro...
    Rule Medium Severity
    Show

  • Verify User Who Owns Backup group File

    To properly set the owner of /etc/group-, run the command: 
    $ sudo chown root /etc/group-
    Rule Medium Severity
    Show

  • Verify User Who Owns Backup gshadow File

    To properly set the owner of /etc/gshadow-, run the command: 
    $ sudo chown root /etc/gshadow-
    Rule Medium Severity
    Show

  • Verify User Who Owns Backup passwd File

    To properly set the owner of /etc/passwd-, run the command: 
    $ sudo chown root /etc/passwd-
    Rule Medium Severity
    Show

  • Verify Group Who Owns Backup shadow File

    To properly set the owner of /etc/shadow-, run the command: 
    $ sudo chown root /etc/shadow-
    Rule Medium Severity
    Show

  • Verify User Who Owns group File

    To properly set the owner of /etc/group, run the command: 
    $ sudo chown root /etc/group
    Rule Medium Severity
    Show

  • Verify User Who Owns gshadow File

    To properly set the owner of /etc/gshadow, run the command: 
    $ sudo chown root /etc/gshadow
    Rule Medium Severity
    Show

  • Verify that Shared Library Directories Have Restrictive Permissions

    System-wide shared library directories, which contain are linked to executables during process load time or run time, are stored in the following directories by default: <pre>/lib /lib64 /usr/lib /...
    Rule Medium Severity
    Show

  • Kernel panic on oops

    To set the runtime status of the <code>kernel.panic_on_oops</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.panic_on_oops=1</pre> To make sure that the setting is p...
    Rule Medium Severity
    Show

  • Disable Core Dumps

    A core dump file is the memory image of an executable program when it was terminated by the operating system due to errant behavior. In most cases, only software developers legitimately need to acc...
    Group
    Show

  • Enable Randomized Layout of Virtual Address Space

    To set the runtime status of the <code>kernel.randomize_va_space</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.randomize_va_space=2</pre> To make sure that the se...
    Rule Medium Severity
    Show

  • SELinux

    SELinux is a feature of the Linux kernel which can be used to guard against misconfigured or compromised programs. SELinux enforces the idea that programs should be limited in what files they can a...
    Group
    Show

  • Ensure SELinux is Not Disabled

    The SELinux state should be set to <code>enforcing</code> or <code>permissive</code> at system boot time. In the file <code>/etc/selinux/config</code>, add or correct the following line to configur...
    Rule High Severity
    Show

  • Ensure SELinux State is Enforcing

    The SELinux state should be set to <code><xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_selinux_state" use="legacy"></xccdf-1.2:sub></code> at system boot time. In the file <code>/et...
    Rule High Severity
    Show

  • Services

    The best protection against vulnerable software is running less software. This section describes how to review the software which OpenEmbedded installs on a system and disable software which is not...
    Group
    Show

  • Restrict at and cron to Authorized Users if Necessary

    The <code>/etc/cron.allow</code> and <code>/etc/at.allow</code> files contain lists of users who are allowed to use <code>cron</code> and at to delay execution of processes. If these files exist an...
    Group
    Show

  • DHCP

    The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server. <br> <br> This guide recommends configuring...
    Group
    Show

  • Minimize the DHCP-Configured Options

    Create the file <code>/etc/dhcp/dhclient.conf</code>, and add an appropriate setting for each of the ten configuration settings which can be obtained via DHCP. For each setting, do one of the follo...
    Rule Unknown Severity
    Show

  • FTP Server

    FTP is a common method for allowing remote access to files. Like telnet, the FTP protocol is unencrypted, which means that passwords and other data transmitted during the session can be captured an...
    Group
    Show

  • Disable vsftpd Service

    The vsftpd service can be disabled with the following command: 
    $ sudo systemctl mask --now vsftpd.service
    Rule Medium Severity
    Show

  • Configure Firewalls to Protect the FTP Server

    By default, <code>iptables</code> blocks access to the ports used by the web server. To configure <code>iptables</code> to allow port 21 traffic, one must edit <code>/etc/sysconfig/iptables</code>...
    Rule Unknown Severity
    Show

  • Disable Dovecot Service

    The dovecot service can be disabled with the following command: 
    $ sudo systemctl mask --now dovecot.service
    Rule Unknown Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules