Skip to content
ATO Pathways
  Log In

Guide to the Secure Configuration of Red Hat Enterprise Linux 7

Rules, Groups, and Values defined within the XCCDF Benchmark

  • Verify Permissions on cron.monthly

    To properly set the permissions of /etc/cron.monthly, run the command: 
    $ sudo chmod 0700 /etc/cron.monthly
    Rule Medium Severity
    Show

  • Verify Permissions on cron.weekly

    To properly set the permissions of /etc/cron.weekly, run the command: 
    $ sudo chmod 0700 /etc/cron.weekly
    Rule Medium Severity
    Show

  • Verify Permissions on crontab

    To properly set the permissions of /etc/crontab, run the command: 
    $ sudo chmod 0600 /etc/crontab
    Rule Medium Severity
    Show

  • Uninstall DHCP Server Package

    If the system does not need to act as a DHCP server, the dhcp package can be uninstalled. The <code>dhcp</code> package can be removed with the fo...
    Rule Medium Severity
    Show

  • Restrict at and cron to Authorized Users if Necessary

    The <code>/etc/cron.allow</code> and <code>/etc/at.allow</code> files contain lists of users who are allowed to use <code>cron</code> and at to del...
    Group
    Show

  • Ensure that /etc/at.deny does not exist

    The file /etc/at.deny should not exist. Use /etc/at.allow instead.
    Rule Medium Severity
    Show

  • Ensure that /etc/cron.deny does not exist

    The file /etc/cron.deny should not exist. Use /etc/cron.allow instead.
    Rule Medium Severity
    Show

  • Verify Group Who Owns /etc/cron.allow file

    If <code>/etc/cron.allow</code> exists, it must be group-owned by <code>root</code>. To properly set the group owner of <code>/etc/cron.allow</cod...
    Rule Medium Severity
    Show

  • Verify User Who Owns /etc/cron.allow file

    If <code>/etc/cron.allow</code> exists, it must be owned by <code>root</code>. To properly set the owner of <code>/etc/cron.allow</code>, run the ...
    Rule Medium Severity
    Show

  • Verify Permissions on /etc/cron.allow file

    If <code>/etc/cron.allow</code> exists, it must have permissions <code>0600</code> or more restrictive. To properly set the permissions of <code>...
    Rule Medium Severity
    Show

  • Deprecated services

    Some deprecated software services impact the overall system security due to their behavior (leak of confidentiality in network exchange, usage as u...
    Group
    Show

  • Uninstall the inet-based telnet server

    The inet-based telnet daemon should be uninstalled.
    Rule High Severity
    Show

  • Uninstall the nis package

    The support for Yellowpages should not be installed unless it is required.
    Rule Low Severity
    Show

  • Uninstall the ntpdate package

    ntpdate is a historical ntp synchronization client for unixes. It sould be uninstalled.
    Rule Low Severity
    Show

  • Uninstall the ssl compliant telnet server

    The telnet daemon, even with ssl support, should be uninstalled.
    Rule High Severity
    Show

  • Uninstall the telnet server

    The telnet daemon should be uninstalled.
    Rule High Severity
    Show

  • DHCP

    The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server....
    Group
    Show

  • Configure DHCP Client if Necessary

    If DHCP must be used, then certain configuration changes can minimize the amount of information it receives and applies from the network, and thus ...
    Group
    Show

  • Disable HTTP Digest Authentication

    The <code>auth_digest</code> module provides encrypted authentication sessions. If this functionality is unnecessary, comment out the related modul...
    Rule Unknown Severity
    Show

  • Minimize the DHCP-Configured Options

    Create the file <code>/etc/dhcp/dhclient.conf</code>, and add an appropriate setting for each of the ten configuration settings which can be obtain...
    Rule Unknown Severity
    Show

  • Configure DHCP Server

    If the system must act as a DHCP server, the configuration information it serves should be minimized. Also, support for other protocols and DNS-upd...
    Group
    Show

  • Configure Logging

    Ensure that the following line exists in <code>/etc/rsyslog.conf</code>: <pre>daemon.* /var/log/daemon.log</pre> Configure logwatch or ot...
    Rule Unknown Severity
    Show

  • Deny BOOTP Queries

    Unless your network needs to support older BOOTP clients, disable support for the bootp protocol by adding or correcting the global option: <pre>de...
    Rule Unknown Severity
    Show

  • Deny Decline Messages

    Edit <code>/etc/dhcp/dhcpd.conf</code> and add or correct the following global option to prevent the DHCP server from responding the DHCPDECLINE me...
    Rule Unknown Severity
    Show

  • Do Not Use Dynamic DNS

    To prevent the DHCP server from receiving DNS information from clients, edit <code>/etc/dhcp/dhcpd.conf</code>, and add or correct the following gl...
    Rule Unknown Severity
    Show

  • Minimize Served Information

    Edit /etc/dhcp/dhcpd.conf. Examine each address range section within the file, and ensure that the following options are not defined unless there i...
    Rule Unknown Severity
    Show

  • Disable DHCP Client

    DHCP is the default network configuration method provided by the system installer, and common on many networks. Nevertheless, manual management of ...
    Group
    Show

  • Disable DHCP Client in ifcfg

    For each interface on the system (e.g. eth0), edit <code>/etc/sysconfig/network-scripts/ifcfg-<i>interface</i></code> and make the following change...
    Rule Unknown Severity
    Show

  • Disable DHCP Server

    The DHCP server <code>dhcpd</code> is not installed or activated by default. If the software was installed and activated, but the system does not n...
    Group
    Show

  • Disable Zone Transfers from the Nameserver

    Is it necessary for a secondary nameserver to receive zone data via zone transfer from the primary server? If not, follow the instructions in this...
    Rule Unknown Severity
    Show

  • Disable DHCP Service

    The <code>dhcpd</code> service should be disabled on any system that does not need to act as a DHCP server. The <code>dhcpd</code> service can be ...
    Rule Medium Severity
    Show

  • DNS Server

    Most organizations have an operational need to run at least one nameserver. However, there are many common attacks involving DNS server software, a...
    Group
    Show

  • Disable DNS Server

    DNS software should be disabled on any systems which does not need to be a nameserver. Note that the BIND DNS server software is not installed on R...
    Group
    Show

  • Uninstall bind Package

    The <code>named</code> service is provided by the <code>bind</code> package. The <code>bind</code> package can be removed with the following comman...
    Rule Low Severity
    Show

  • Disable named Service

    The named service can be disabled with the following command: 
    $ sudo systemctl mask --now named.service
    Rule Medium Severity
    Show

  • Isolate DNS from Other Services

    This section discusses mechanisms for preventing the DNS server from interfering with other services. This is done both to protect the remainder of...
    Group
    Show

  • Run DNS Software in a chroot Jail

    Install the <code>bind-chroot</code> package: <pre>$ sudo yum install bind-chroot</pre> Place a valid named.conf file inside the chroot jail: <pre>...
    Group
    Show

  • Run DNS Software on Dedicated Servers

    Since DNS is a high-risk service which must frequently be made available to the entire Internet, it is strongly recommended that no other services ...
    Group
    Show

  • Protect DNS Data from Tampering or Attack

    This section discusses DNS configuration options which make it more difficult for attackers to gain access to private DNS data or to modify DNS data.
    Group
    Show

  • Authenticate Zone Transfers

    If it is necessary for a secondary nameserver to receive zone data via zone transfer from the primary server, follow the instructions here. Use dn...
    Rule Medium Severity
    Show

  • Disable Dynamic Updates

    Is there a mission-critical reason to enable the risky dynamic update functionality? If not, edit <code>/etc/named.conf</code>. For each zone speci...
    Rule Unknown Severity
    Show

  • Disable vsftpd Service

    The vsftpd service can be disabled with the following command: 
    $ sudo systemctl mask --now vsftpd.service
    Rule Medium Severity
    Show

  • Configure vsftpd to Provide FTP Service if Necessary

    The primary vsftpd configuration file is /etc/vsftpd.conf, if that file exists, or /etc/vsftpd/vsftpd.conf if it does not.
    Group
    Show

  • Use Views to Partition External and Internal Information

    If it is not possible to run external and internal nameservers on separate physical systems, run BIND9 and simulate this feature using views. Edit ...
    Group
    Show

  • Run Separate DNS Servers for External and Internal Queries

    Is it possible to run external and internal nameservers on separate systems? If so, follow the configuration guidance in this section. On the exter...
    Group
    Show

  • Docker Service

    The docker service is necessary to create containers, which are self-sufficient and self-contained applications using the resource isolation fe...
    Group
    Show

  • Install the docker Package

    The docker package provides necessary software to create containers, which are self-sufficient and self-contained applications using the resource i...
    Rule Medium Severity
    Show

  • Enable the Docker service

    The docker service is commonly needed to create containers. The <code>docker</code> service can be enabled with the following command: <pre>$ su...
    Rule Medium Severity
    Show

  • Ensure SELinux support is enabled in Docker

    To enable the SELinux for the Docker service, the Docker service must be configured to run the Docker daemon with <code>--selinux-enabled</code> op...
    Rule High Severity
    Show

  • Use direct-lvm with the Device Mapper Storage Driver

    To use Docker in production with the device mapper storage driver, the Docker daemon should be configured to use direct-lvm instead of loopback dev...
    Rule Low Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules