Skip to content
Log In

Guide to the Secure Configuration of Anolis OS 8

Rules, Groups, and Values defined within the XCCDF Benchmark

  • Verify Group Who Owns passwd File

    To properly set the group owner of /etc/passwd, run the command: 
    $ sudo chgrp root /etc/passwd
    Rule Medium Severity
    Show

  • Verify Group Who Owns shadow File

    To properly set the group owner of /etc/shadow, run the command: 
    $ sudo chgrp root /etc/shadow
    Rule Medium Severity
    Show

  • Verify Permissions on /var/log Directory

    To properly set the permissions of /var/log, run the command: 
    $ sudo chmod 0755 /var/log
    Rule Medium Severity
    Show

  • Verify Permissions on Backup group File

    To properly set the permissions of /etc/group-, run the command: 
    $ sudo chmod 0644 /etc/group-
    Rule Medium Severity
    Show

  • Verify Permissions on Backup gshadow File

    To properly set the permissions of /etc/gshadow-, run the command: 
    $ sudo chmod 0000 /etc/gshadow-
    Rule Medium Severity
    Show

  • Verify Permissions on Backup passwd File

    To properly set the permissions of /etc/passwd-, run the command: 
    $ sudo chmod 0644 /etc/passwd-
    Rule Medium Severity
    Show

  • Verify Permissions on Backup shadow File

    To properly set the permissions of /etc/shadow-, run the command: 
    $ sudo chmod 0000 /etc/shadow-
    Rule Medium Severity
    Show

  • Verify Permissions on gshadow File

    To properly set the permissions of /etc/gshadow, run the command: 
    $ sudo chmod 0000 /etc/gshadow
    Rule Medium Severity
    Show

  • Verify Permissions on passwd File

    To properly set the permissions of /etc/passwd, run the command: 
    $ sudo chmod 0644 /etc/passwd
    Rule Medium Severity
    Show

  • Verify Permissions on shadow File

    To properly set the permissions of /etc/shadow, run the command: 
    $ sudo chmod 0000 /etc/shadow
    Rule Medium Severity
    Show

  • Verify Permissions on Files within /var/log Directory

    The /var/log directory contains files with logs of error messages in the system and should only be accessed by authorized personnel.
    Group
    Show

  • Verify Group Who Owns /var/log Directory

    To properly set the group owner of /var/log, run the command: 
    $ sudo chgrp root /var/log
    Rule Medium Severity
    Show

  • Verify Group Who Owns /var/log/messages File

    To properly set the group owner of /var/log/messages, run the command: 
    $ sudo chgrp root /var/log/messages
    Rule Medium Severity
    Show

  • Verify Group Who Owns /var/log/syslog File

    To properly set the group owner of /var/log/syslog, run the command: 
    $ sudo chgrp adm /var/log/syslog
    Rule Medium Severity
    Show

  • Verify User Who Owns /var/log Directory

    To properly set the owner of /var/log, run the command: 
    $ sudo chown root /var/log
    Rule Medium Severity
    Show

  • Verify User Who Owns /var/log/messages File

    To properly set the owner of /var/log/messages, run the command: 
    $ sudo chown root /var/log/messages
    Rule Medium Severity
    Show

  • Disable core dump backtraces

    The <code>ProcessSizeMax</code> option in <code>[Coredump]</code> section of <code>/etc/systemd/coredump.conf</code> specifies the maximum size in bytes of a core which will be processed. Core dump...
    Rule Medium Severity
    Show

  • Verify File Permissions Within Some Important Directories

    Some directories contain files whose confidentiality or integrity is notably important and may also be susceptible to misconfiguration over time, particularly if unpackaged software is installed. A...
    Group
    Show

  • Verify that Shared Library Directories Have Root Ownership

    System-wide shared library files, which are linked to executables during process load time or run time, are stored in the following directories by default: <pre>/lib /lib64 /usr/lib /usr/lib64 </pr...
    Rule Medium Severity
    Show

  • Verify that System Executable Directories Have Restrictive Permissions

    System executables are stored in the following directories by default: <pre>/bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin</pre> These directories should not be group-writable or worl...
    Rule Medium Severity
    Show

  • Verify that System Executables Have Root Ownership

    System executables are stored in the following directories by default: <pre>/bin /sbin /usr/bin /usr/libexec /usr/local/bin /usr/local/sbin /usr/sbin</pre> All files in these directories should be ...
    Rule Medium Severity
    Show

  • Verify that Shared Library Files Have Root Ownership

    System-wide shared library files, which are linked to executables during process load time or run time, are stored in the following directories by default: <pre>/lib /lib64 /usr/lib /usr/lib64 </pr...
    Rule Medium Severity
    Show

  • Verify that System Executables Have Restrictive Permissions

    System executables are stored in the following directories by default: <pre>/bin /sbin /usr/bin /usr/libexec /usr/local/bin /usr/local/sbin /usr/sbin</pre> All files in these directories should not...
    Rule Medium Severity
    Show

  • Disable storing core dump

    The Storage option in [Coredump] sectionof /etc/systemd/coredump.conf can be set to none to disable storing core dumps permanently.
    Rule Medium Severity
    Show

  • Restrict Dynamic Mounting and Unmounting of Filesystems

    Linux includes a number of facilities for the automated addition and removal of filesystems on a running system. These facilities may be necessary in many environments, but this capability also ca...
    Group
    Show

  • Restrict Partition Mount Options

    System partitions can be mounted with certain options that limit what files on those partitions can do. These options are set in the <code>/etc/fstab</code> configuration file, and can be used to m...
    Group
    Show

  • Add nodev Option to /dev/shm

    The <code>nodev</code> mount option can be used to prevent creation of device files in <code>/dev/shm</code>. Legitimate character and block devices should not exist within temporary directories li...
    Rule Medium Severity
    Show

  • Add nosuid Option to /dev/shm

    The <code>nosuid</code> mount option can be used to prevent execution of setuid programs in <code>/dev/shm</code>. The SUID and SGID permissions should not be required in these world-writable dire...
    Rule Medium Severity
    Show

  • Restrict Programs from Dangerous Execution Patterns

    The recommendations in this section are designed to ensure that the system's features to protect against potentially dangerous program execution are activated. These protections are applied at the ...
    Group
    Show

  • Disable the uvcvideo module

    If the device contains a camera it should be covered or disabled when not in use.
    Rule Medium Severity
    Show

  • Disable Core Dumps for SUID programs

    To set the runtime status of the <code>fs.suid_dumpable</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.suid_dumpable=0</pre> To make sure that the setting is persisten...
    Rule Medium Severity
    Show

  • Enable ExecShield

    ExecShield describes kernel features that provide protection against exploitation of memory corruption errors such as buffer overflows. These features include random placement of the stack and othe...
    Group
    Show

  • kernel.kptr_restrict

    Configure exposition of kernel pointer addresses
    Value
    Show

  • Enable Randomized Layout of Virtual Address Space

    To set the runtime status of the <code>kernel.randomize_va_space</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.randomize_va_space=2</pre> To make sure that the se...
    Rule Medium Severity
    Show

  • SELinux policy

    Type of policy in use. Possible values are:
    targeted - Only targeted network daemons are protected.
    strict - Full SELinux protection.
    mls - Multiple levels of security
    Value
    Show

  • SELinux state

    enforcing - SELinux security policy is enforced.
    permissive - SELinux prints warnings instead of enforcing.
    disabled - SELinux is fully disabled.
    Value
    Show

  • Ensure SELinux is Not Disabled

    The SELinux state should be set to <code>enforcing</code> or <code>permissive</code> at system boot time. In the file <code>/etc/selinux/config</code>, add or correct the following line to configur...
    Rule High Severity
    Show

  • Base Services

    This section addresses the base services that are installed on a Anolis OS 8 default installation which are not covered in other sections. Some of these services listen on the network and should be...
    Group
    Show

  • Avahi Server

    The Avahi daemon implements the DNS Service Discovery and Multicast DNS protocols, which provide service and host discovery on a network. It allows a system to automatically identify resources on t...
    Group
    Show

  • Configure Avahi if Necessary

    If your system requires the Avahi daemon, its configuration can be restricted to improve security. The Avahi daemon configuration file is <code>/etc/avahi/avahi-daemon.conf</code>. The following se...
    Group
    Show

  • Disable Avahi Publishing

    To prevent Avahi from publishing its records, edit <code>/etc/avahi/avahi-daemon.conf</code> and ensure the following line appears in the <code>[publish]</code> section: <pre>disable-publishing=yes...
    Rule Low Severity
    Show

  • Disable Avahi Server if Possible

    Because the Avahi daemon service keeps an open network port, it is subject to network attacks. Disabling it can reduce the system's vulnerability to such attacks.
    Group
    Show

  • Disable Apache Qpid (qpidd)

    The <code>qpidd</code> service provides high speed, secure, guaranteed delivery services. It is an implementation of the Advanced Message Queuing Protocol. By default the qpidd service will bind ...
    Rule Low Severity
    Show

  • Disable Network Router Discovery Daemon (rdisc)

    The <code>rdisc</code> service implements the client side of the ICMP Internet Router Discovery Protocol (IRDP), which allows discovery of routers on the local subnet. If a router is discovered the...
    Rule Medium Severity
    Show

  • Cron and At Daemons

    The cron and at services are used to allow commands to be executed at a later time. The cron service is required by almost all systems to perform necessary maintenance tasks, while at may or may no...
    Group
    Show

  • Install the cron service

    The Cron service should be installed.
    Rule Medium Severity
    Show

  • Enable cron Service

    The <code>crond</code> service is used to execute commands at preconfigured times. It is required by almost all systems to perform necessary maintenance tasks, such as notifying root of system acti...
    Rule Medium Severity
    Show

  • Enable cron Service

    The <code>crond</code> service is used to execute commands at preconfigured times. It is required by almost all systems to perform necessary maintenance tasks, such as notifying root of system acti...
    Rule Medium Severity
    Show

  • Verify Group Who Owns cron.d

    To properly set the group owner of /etc/cron.d, run the command: 
    $ sudo chgrp root /etc/cron.d
    Rule Medium Severity
    Show

  • Verify Group Who Owns cron.daily

    To properly set the group owner of /etc/cron.daily, run the command: 
    $ sudo chgrp root /etc/cron.daily
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules