Skip to content
Log In

Guide to the Secure Configuration of Anolis OS 8

Rules, Groups, and Values defined within the XCCDF Benchmark

  • Enable SLUB debugging support

    SLUB has extensive debug support features and this allows the allocator validation checking to be enabled. The configuration that was used to build kernel is available at <code>/boot/config-*</cod...
    Rule Medium Severity
    Show

  • Enable TCP/IP syncookie support

    Normal TCP/IP networking is open to an attack known as SYN flooding. It is denial-of-service attack that prevents legitimate remote users from being able to connect to your computer during an ongoi...
    Rule Medium Severity
    Show

  • Unmap kernel when running in userspace (aka KAISER)

    Speculation attacks against some high-performance processors can be used to bypass MMU permission checks and leak kernel data to userspace. This can be defended against by unmapping the kernel when...
    Rule Medium Severity
    Show

  • Disable x86 vsyscall emulation

    Disabling it is roughly equivalent to booting with vsyscall=none, except that it will also disable the helpful warning if a program tries to use a vsyscall. With this option set to N, offending pro...
    Rule Low Severity
    Show

  • Ensure rsyslog is Installed

    Rsyslog is installed by default. The rsyslog package can be installed with the following command: 
     $ sudo yum install rsyslog
    Rule Medium Severity
    Show

  • Enable rsyslog Service

    The <code>rsyslog</code> service provides syslog-style logging by default on Anolis OS 8. The <code>rsyslog</code> service can be enabled with the following command: <pre>$ sudo systemctl enable r...
    Rule Medium Severity
    Show

  • Enable systemd-journald Service

    The <code>systemd-journald</code> service is an essential component of systemd. The <code>systemd-journald</code> service can be enabled with the following command: <pre>$ sudo systemctl enable sy...
    Rule Medium Severity
    Show

  • Ensure Rsyslog Authenticates Off-Loaded Audit Records

    Rsyslogd is a system utility providing support for message logging. Support for both internet and UNIX domain sockets enables this utility to support both local and remote logging. Couple this uti...
    Rule Medium Severity
    Show

  • Ensure Rsyslog Encrypts Off-Loaded Audit Records

    Rsyslogd is a system utility providing support for message logging. Support for both internet and UNIX domain sockets enables this utility to support both local and remote logging. Couple this uti...
    Rule Medium Severity
    Show

  • Ensure Log Files Are Owned By Appropriate User

    The owner of all log files written by <code>rsyslog</code> should be <code>root</code>. These log files are determined by the second part of each Rule line in <code>/etc/rsyslog.conf</code> and t...
    Rule Medium Severity
    Show

  • systemd-journald

    systemd-journald is a system service that collects and stores logging data. It creates and maintains structured, indexed journals based on logging information that is received from a variety of sou...
    Group
    Show

  • Ensure journald is configured to send logs to rsyslog

    Data from journald may be stored in volatile memory or persisted locally. Utilities exist to accept remote export of journald logs.
    Rule Medium Severity
    Show

  • Ensure journald is configured to write log files to persistent disk

    The journald system may store log files in volatile memory or locally on disk. If the logs are only stored in volatile memory they will we lost upon reboot.
    Rule Medium Severity
    Show

  • Ensure logrotate is Installed

    logrotate is installed by default. The logrotate package can be installed with the following command: 
     $ sudo yum install logrotate
    Rule Medium Severity
    Show

  • Ensure Logrotate Runs Periodically

    The <code>logrotate</code> utility allows for the automatic rotation of log files. The frequency of rotation is specified in <code>/etc/logrotate.conf</code>, which triggers a cron task or a timer...
    Rule Medium Severity
    Show

  • Configure rsyslogd to Accept Remote Messages If Acting as a Log Server

    By default, <code>rsyslog</code> does not listen over the network for log messages. If needed, modules can be enabled to allow the rsyslog daemon to receive messages from other systems and for the ...
    Group
    Show

  • Ensure syslog-ng is Installed

    syslog-ng can be installed in replacement of rsyslog. The syslog-ng-core package can be installed with the following command: 
    $ sudo yum install syslog-ng-core
    Rule Medium Severity
    Show

  • Enable syslog-ng Service

    The <code>syslog-ng</code> service (in replacement of rsyslog) provides syslog-style logging by default on Debian. The <code>syslog-ng</code> service can be enabled with the following command: <pr...
    Rule Medium Severity
    Show

  • Enable rsyslog to Accept Messages via TCP, if Acting As Log Server

    The <code>rsyslog</code> daemon should not accept remote messages unless the system acts as a log server. If the system needs to act as a central log server, add the following lines to <code>/etc/r...
    Rule Unknown Severity
    Show

  • Enable rsyslog to Accept Messages via UDP, if Acting As Log Server

    The <code>rsyslog</code> daemon should not accept remote messages unless the system acts as a log server. If the system needs to act as a central log server, add the following lines to <code>/etc/r...
    Rule Unknown Severity
    Show

  • Disable IPv6 Addressing on All IPv6 Interfaces

    To disable support for (<code>ipv6</code>) addressing on all interface add the following line to <code>/etc/sysctl.d/ipv6.conf</code> (or another file in <code>/etc/sysctl.d</code>): <pre>net.ipv6....
    Rule Medium Severity
    Show

  • Disable IPv6 Addressing on IPv6 Interfaces by Default

    To disable support for (<code>ipv6</code>) addressing on interfaces by default add the following line to <code>/etc/sysctl.d/ipv6.conf</code> (or another file in <code>/etc/sysctl.d</code>): <pre>n...
    Rule Medium Severity
    Show

  • Remote Log Server

    Specify an URI or IP address of a remote host where the log messages will be sent and stored.
    Value
    Show

  • Ensure Logs Sent To Remote Host

    To configure rsyslog to send logs to a remote log server, open <code>/etc/rsyslog.conf</code> and read and understand the last section of the file, which describes the multiple directives necessary...
    Rule Medium Severity
    Show

  • Network Configuration and Firewalls

    Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses the security impact of decisions about networking wh...
    Group
    Show

  • firewalld

    The dynamic firewall daemon <code>firewalld</code> provides a dynamically managed firewall with support for network “zones” to assign a level of trust to a network and its associated connections an...
    Group
    Show

  • Inspect and Activate Default firewalld Rules

    Firewalls can be used to separate networks into different zones based on the level of trust the user has decided to place on the devices and traffic within that network. <code>NetworkManager</code>...
    Group
    Show

  • Verify firewalld Enabled

    The firewalld service can be enabled with the following command: 
    $ sudo systemctl enable firewalld.service
    Rule Medium Severity
    Show

  • Configure IPv6 Settings if Necessary

    A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from the network. From a security perspective, manually...
    Group
    Show

  • IPSec Support

    Support for Internet Protocol Security (IPsec) is provided with Libreswan.
    Group
    Show

  • Inspect and Activate Default Rules

    View the currently-enforced <code>iptables</code> rules by running the command: <pre>$ sudo iptables -nL --line-numbers</pre> The command is analogous for <code>ip6tables</code>. <br> <br> ...
    Group
    Show

  • Verify ip6tables Enabled if Using IPv6

    The ip6tables service can be enabled with the following command: 
    $ sudo systemctl enable ip6tables.service
    Rule Medium Severity
    Show

  • Verify iptables Enabled

    The iptables service can be enabled with the following command: 
    $ sudo systemctl enable iptables.service
    Rule Medium Severity
    Show

  • Set Default ip6tables Policy for Incoming Packets

    To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in <code>/etc/sysconfig/ip6tables</code>: <pre...
    Rule Medium Severity
    Show

  • Set Default iptables Policy for Incoming Packets

    To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in <code>/etc/sysconfig/iptables</code>: <pre>...
    Rule Medium Severity
    Show

  • Set Default iptables Policy for Forwarded Packets

    To set the default policy to DROP (instead of ACCEPT) for the built-in FORWARD chain which processes packets that will be forwarded from one interface to another, add or correct the following line ...
    Rule Medium Severity
    Show

  • IPv6

    The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the number of available addresses. Another important featu...
    Group
    Show

  • Disable Support for IPv6 Unless Needed

    Despite configuration that suggests support for IPv6 has been disabled, link-local IPv6 address auto-configuration occurs even when only an IPv4 address is assigned. The only way to effectively pre...
    Group
    Show

  • Disable IPv6 Networking Support Automatic Loading

    To prevent the IPv6 kernel module (<code>ipv6</code>) from binding to the IPv6 networking stack, add the following line to <code>/etc/modprobe.d/disabled.conf</code> (or another file in <code>/etc/...
    Rule Medium Severity
    Show

  • net.ipv6.conf.default.accept_source_route

    Trackers could be using source-routed packets to generate traffic that seems to be intra-net, but actually was created outside and has been redirected.
    Value
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.all.accept_source_route=0</pre> ...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for IPv6 Forwarding

    To set the runtime status of the <code>net.ipv6.conf.all.forwarding</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.all.forwarding=0</pre> To make sure that ...
    Rule Medium Severity
    Show

  • Disable Accepting Router Advertisements on all IPv6 Interfaces by Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_ra</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.default.accept_ra=0</pre> To make sure...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.default.accept_redirects=0</pre...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.default.accept_source_route=...
    Rule Medium Severity
    Show

  • net.ipv4.conf.default.secure_redirects

    Enable to prevent hijacking of routing path by only allowing redirects from gateways known in routing table. Disable to refuse acceptance of secure ICMP redirected packages by default.
    Value
    Show

  • Kernel Parameters Which Affect Networking

    The sysctl utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking and have security implications are described here.
    Group
    Show

  • Network Related Kernel Runtime Parameters for Hosts and Routers

    Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against certain types of IPv4 protocol attacks.
    Group
    Show

  • net.ipv4.conf.all.accept_redirects

    Disable ICMP Redirect Acceptance
    Value
    Show

  • net.ipv4.conf.all.accept_source_route

    Trackers could be using source-routed packets to generate traffic that seems to be intra-net, but actually was created outside and has been redirected.
    Value
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules