Guide to the Secure Configuration of Anolis OS 8
Rules, Groups, and Values defined within the XCCDF Benchmark
-
Disable Accepting Packets Routed Between Local Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_local</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_local=0</pre> To make sure t...Rule Medium Severity -
Disable Accepting ICMP Redirects for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0</pre> To mak...Rule Medium Severity -
Configure Response Mode of ARP Requests for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.arp_ignore</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.arp_ignore=<xccdf-1.2:sub idref="xccd...Rule Medium Severity -
Prevent Routing External Traffic to Local Loopback on All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.route_localnet</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.route_localnet=0</pre> To make su...Rule Medium Severity -
Configure Sending and Accepting Shared Media Redirects for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.shared_media=<xccdf-1.2:sub idref="...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=...Rule Medium Severity -
Configure Kernel Parameter for Accepting Secure Redirects By Default
To set the runtime status of the <code>net.ipv4.conf.default.secure_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.secure_redirects=0</pre...Rule Medium Severity -
Configure Sending and Accepting Shared Media Redirects by Default
To set the runtime status of the <code>net.ipv4.conf.default.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.shared_media=<xccdf-1.2:sub...Rule Medium Severity -
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0</pre> To make su...Rule Medium Severity -
Verify ufw Enabled
Theufwservice can be enabled with the following command:$ sudo systemctl enable ufw.service
Rule Medium Severity -
Disable DCCP Support
The Datagram Congestion Control Protocol (DCCP) is a relatively new transport layer protocol, designed to support streaming media and telephony. To configure the system to prevent the <code>dccp</...Rule Medium Severity -
File Permissions and Masks
Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which they should not have access. <br> <br> Severa...Group -
Verify that All World-Writable Directories Have Sticky Bits Set
When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may ...Rule Medium Severity -
Enable Kernel Parameter to Enforce DAC on Hardlinks
To set the runtime status of the <code>fs.protected_hardlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protected_hardlinks=1</pre> To make sure that the setting ...Rule Medium Severity -
Enable Kernel Parameter to Enforce DAC on Symlinks
To set the runtime status of the <code>fs.protected_symlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protected_symlinks=1</pre> To make sure that the setting is...Rule Medium Severity -
Verify User Who Owns Backup group File
To properly set the owner of/etc/group-, run the command:$ sudo chown root /etc/group-
Rule Medium Severity -
Verify User Who Owns group File
To properly set the owner of/etc/group, run the command:$ sudo chown root /etc/group
Rule Medium Severity -
Verify that Shared Library Directories Have Restrictive Permissions
System-wide shared library directories, which contain are linked to executables during process load time or run time, are stored in the following directories by default: <pre>/lib /lib64 /usr/lib /...Rule Medium Severity -
Verify that Shared Library Files Have Restrictive Permissions
System-wide shared library files, which are linked to executables during process load time or run time, are stored in the following directories by default: <pre>/lib /lib64 /usr/lib /usr/lib64 </pr...Rule Medium Severity -
Disable the Automounter
The <code>autofs</code> daemon mounts and unmounts filesystems, such as user home directories shared via NFS, on demand. In addition, autofs can be used to handle removable media, and the default c...Rule Medium Severity -
Kernel panic on oops
To set the runtime status of the <code>kernel.panic_on_oops</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.panic_on_oops=1</pre> To make sure that the setting is p...Rule Medium Severity -
Disable Core Dumps
A core dump file is the memory image of an executable program when it was terminated by the operating system due to errant behavior. In most cases, only software developers legitimately need to acc...Group -
Disable Core Dumps for All Users
To disable core dumps for all users, add the following line to <code>/etc/security/limits.conf</code>, or to a file within the <code>/etc/security/limits.d/</code> directory: <pre>* hard core...Rule Medium Severity -
Restrict Exposed Kernel Pointer Addresses Access
To set the runtime status of the <code>kernel.kptr_restrict</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.kptr_restrict=<xccdf-1.2:sub idref="xccdf_org.ssgproject...Rule Medium Severity -
SELinux
SELinux is a feature of the Linux kernel which can be used to guard against misconfigured or compromised programs. SELinux enforces the idea that programs should be limited in what files they can a...Group -
Ensure SELinux State is Enforcing
The SELinux state should be set to <code><xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_selinux_state" use="legacy"></xccdf-1.2:sub></code> at system boot time. In the file <code>/et...Rule High Severity -
Services
The best protection against vulnerable software is running less software. This section describes how to review the software which Anolis OS 8 installs on a system and disable software which is not ...Group -
Disable Avahi Server Software
Theavahi-daemonservice can be disabled with the following command:$ sudo systemctl mask --now avahi-daemon.service
Rule Medium Severity -
Disable Automatic Bug Reporting Tool (abrtd)
The Automatic Bug Reporting Tool (<code>abrtd</code>) daemon collects and reports crash data when an application crash is detected. Using a variety of plugins, abrtd can email crash reports to syst...Rule Medium Severity -
Disable At Service (atd)
The <code>at</code> and <code>batch</code> commands can be used to schedule tasks that are meant to be executed only once. This allows delayed execution in a manner similar to cron, except that it ...Rule Medium Severity -
Verify Group Who Owns cron.monthly
To properly set the group owner of/etc/cron.monthly, run the command:$ sudo chgrp root /etc/cron.monthly
Rule Medium Severity -
Verify Group Who Owns cron.weekly
To properly set the group owner of/etc/cron.weekly, run the command:$ sudo chgrp root /etc/cron.weekly
Rule Medium Severity -
Verify Owner on cron.d
To properly set the owner of/etc/cron.d, run the command:$ sudo chown root /etc/cron.d
Rule Medium Severity -
Verify Permissions on cron.d
To properly set the permissions of/etc/cron.d, run the command:$ sudo chmod 0700 /etc/cron.d
Rule Medium Severity -
Restrict at and cron to Authorized Users if Necessary
The <code>/etc/cron.allow</code> and <code>/etc/at.allow</code> files contain lists of users who are allowed to use <code>cron</code> and at to delay execution of processes. If these files exist an...Group -
DHCP
The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server. <br> <br> This guide recommends configuring...Group -
Minimize the DHCP-Configured Options
Create the file <code>/etc/dhcp/dhclient.conf</code>, and add an appropriate setting for each of the ten configuration settings which can be obtained via DHCP. For each setting, do one of the follo...Rule Unknown Severity -
FTP Server
FTP is a common method for allowing remote access to files. Like telnet, the FTP protocol is unencrypted, which means that passwords and other data transmitted during the session can be captured an...Group -
Configure Firewalls to Protect the FTP Server
By default, <code>iptables</code> blocks access to the ports used by the web server. To configure <code>iptables</code> to allow port 21 traffic, one must edit <code>/etc/sysconfig/iptables</code>...Rule Unknown Severity -
Web Server
The web server is responsible for providing access to content via the HTTP protocol. Web servers represent a significant security risk because: <br> <br> <ul> <li>The HTTP port is commo...Group -
Disable Dovecot Service
Thedovecotservice can be disabled with the following command:$ sudo systemctl mask --now dovecot.service
Rule Unknown Severity -
Remove SSH Server iptables Firewall exception (Unusual)
By default, inbound connections to SSH's port are allowed. If the SSH server is not being used, this exception should be removed from the firewall configuration. <br> <br> Edit the files <co...Rule Unknown Severity -
Ensure SSH MaxStartups is configured
The MaxStartups parameter specifies the maximum number of concurrent unauthenticated connections to the SSH daemon. Additional connections will be dropped until authentication succeeds or the Login...Rule Medium Severity -
Mail Server Software
Mail servers are used to send and receive email over the network. Mail is a very common service, and Mail Transfer Agents (MTAs) are obvious targets of network attack. Ensure that systems are not r...Group -
Configure System to Forward All Mail From Postmaster to The Root Account
Verify the administrators are notified in the event of an audit processing failure. Check that the "/etc/aliases" file has a defined value for "root". <pre>$ sudo grep "postmaster:\s*root$" /etc/al...Rule Medium Severity -
Disable Network File Systems (netfs)
The netfs script manages the boot-time mounting of several types of networked filesystems, of which NFS and Samba are the most common. If these filesystem types are not in use, the script can be di...Rule Unknown Severity -
Disable rpcbind Service
The rpcbind utility maps RPC services to the ports on which they listen. RPC processes notify rpcbind when they start, registering the ports they are listening on and the RPC program numbers they e...Rule Low Severity -
Disable Network File System (nfs)
The Network File System (NFS) service allows remote hosts to mount and interact with shared filesystems on the local system. If the local system is not designated as a NFS server then this service ...Rule Unknown Severity -
The Chronyd service is enabled
chrony is a daemon which implements the Network Time Protocol (NTP) is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information o...Rule Medium Severity -
A remote time server for Chrony is configured
<code>Chrony</code> is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. M...Rule Medium Severity
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.
Capacity
Modules