Skip to content
Log In

Guide to the Secure Configuration of UnionTech OS Server 20

Rules, Groups, and Values defined within the XCCDF Benchmark

  • Ensure Logs Sent To Remote Host

    To configure rsyslog to send logs to a remote log server, open <code>/etc/rsyslog.conf</code> and read and understand the last section of the file, which describes the multiple directives necessary...
    Rule Medium Severity
    Show

  • Network Configuration and Firewalls

    Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses the security impact of decisions about networking wh...
    Group
    Show

  • Install libreswan Package

    The libreswan package provides an implementation of IPsec and IKE, which permits the creation of secure tunnels over untrusted networks. The <code>libreswan</code> package can be installed with the...
    Rule Medium Severity
    Show

  • iptables and ip6tables

    A host-based firewall called <code>netfilter</code> is included as part of the Linux kernel distributed with the system. It is activated by default. This firewall is controlled by the program <code...
    Group
    Show

  • Inspect and Activate Default Rules

    View the currently-enforced <code>iptables</code> rules by running the command: <pre>$ sudo iptables -nL --line-numbers</pre> The command is analogous for <code>ip6tables</code>. <br> <br> ...
    Group
    Show

  • Verify ip6tables Enabled if Using IPv6

    The ip6tables service can be enabled with the following command: 
    $ sudo systemctl enable ip6tables.service
    Rule Medium Severity
    Show

  • Verify iptables Enabled

    The iptables service can be enabled with the following command: 
    $ sudo systemctl enable iptables.service
    Rule Medium Severity
    Show

  • Set Default ip6tables Policy for Incoming Packets

    To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in <code>/etc/sysconfig/ip6tables</code>: <pre...
    Rule Medium Severity
    Show

  • Strengthen the Default Ruleset

    The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in the configuration files <code>iptables</code> and <code>ip6tables</code> in t...
    Group
    Show

  • Set Default iptables Policy for Incoming Packets

    To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in <code>/etc/sysconfig/iptables</code>: <pre>...
    Rule Medium Severity
    Show

  • Set Default iptables Policy for Forwarded Packets

    To set the default policy to DROP (instead of ACCEPT) for the built-in FORWARD chain which processes packets that will be forwarded from one interface to another, add or correct the following line ...
    Rule Medium Severity
    Show

  • Disable Accepting Packets Routed Between Local Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.accept_local</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_local=0</pre> To make sure t...
    Rule Medium Severity
    Show

  • Configure ARP filtering for All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.arp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.arp_filter=<xccdf-1.2:sub idref="xccd...
    Rule Medium Severity
    Show

  • Configure Response Mode of ARP Requests for All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.arp_ignore</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.arp_ignore=<xccdf-1.2:sub idref="xccd...
    Rule Medium Severity
    Show

  • Prevent Routing External Traffic to Local Loopback on All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.route_localnet</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.route_localnet=0</pre> To make su...
    Rule Medium Severity
    Show

  • Configure Sending and Accepting Shared Media Redirects for All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.shared_media=<xccdf-1.2:sub idref="...
    Rule Medium Severity
    Show

  • Configure Sending and Accepting Shared Media Redirects by Default

    To set the runtime status of the <code>net.ipv4.conf.default.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.shared_media=<xccdf-1.2:sub...
    Rule Medium Severity
    Show

  • Disable RDS Support

    The Reliable Datagram Sockets (RDS) protocol is a transport layer protocol designed to provide reliable high-bandwidth, low-latency communications between nodes in a cluster. To configure the syst...
    Rule Low Severity
    Show

  • Disable TIPC Support

    The Transparent Inter-Process Communication (TIPC) protocol is designed to provide communications between nodes in a cluster. To configure the system to prevent the <code>tipc</code> kernel module...
    Rule Low Severity
    Show

  • File Permissions and Masks

    Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which they should not have access. <br> <br> Severa...
    Group
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules