Skip to content
Log In

Guide to the Secure Configuration of Anolis OS 23

Rules, Groups, and Values defined within the XCCDF Benchmark

  • Ensure System Log Files Have Correct Permissions

    The file permissions for all log files written by <code>rsyslog</code> should be set to 640, or more restrictive. These log files are determined by the second part of each Rule line in <code>/etc/r...
    Rule Medium Severity
    Show

  • Ensure All Logs are Rotated by logrotate

    Edit the file <code>/etc/logrotate.d/syslog</code>. Find the first line, which should look like this (wrapped for clarity): <pre>/var/log/messages /var/log/secure /var/log/maillog /var/log/spoole...
    Group
    Show

  • Rsyslog Logs Sent To Remote Host

    If system logs are to be useful in detecting malicious activities, it is necessary to send logs to a remote server. An intruder who has compromised the root account on a system may delete the log e...
    Group
    Show

  • Ensure Logs Sent To Remote Host

    To configure rsyslog to send logs to a remote log server, open <code>/etc/rsyslog.conf</code> and read and understand the last section of the file, which describes the multiple directives necessary...
    Rule Medium Severity
    Show

  • Install firewalld Package

    The firewalld package can be installed with the following command: 
    $ sudo yum install firewalld
    Rule Medium Severity
    Show

  • iptables and ip6tables

    A host-based firewall called <code>netfilter</code> is included as part of the Linux kernel distributed with the system. It is activated by default. This firewall is controlled by the program <code...
    Group
    Show

  • Inspect and Activate Default Rules

    View the currently-enforced <code>iptables</code> rules by running the command: <pre>$ sudo iptables -nL --line-numbers</pre> The command is analogous for <code>ip6tables</code>. <br> <br> ...
    Group
    Show

  • Strengthen the Default Ruleset

    The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in the configuration files <code>iptables</code> and <code>ip6tables</code> in t...
    Group
    Show

  • Set Default iptables Policy for Forwarded Packets

    To set the default policy to DROP (instead of ACCEPT) for the built-in FORWARD chain which processes packets that will be forwarded from one interface to another, add or correct the following line ...
    Rule Medium Severity
    Show

  • Configure Accepting Router Advertisements on All IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_ra</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.all.accept_ra=0</pre> To make sure that th...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.all.accept_source_route=0</pre> ...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.default.accept_source_route=...
    Rule Medium Severity
    Show

  • Disable Accepting Packets Routed Between Local Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.accept_local</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_local=0</pre> To make sure t...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0</pre> ...
    Rule Medium Severity
    Show

  • Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.log_martians</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.log_martians=1</pre> To make sure t...
    Rule Unknown Severity
    Show

  • Prevent Routing External Traffic to Local Loopback on All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.route_localnet</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.route_localnet=0</pre> To make su...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default

    To set the runtime status of the <code>net.ipv4.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=...
    Rule Medium Severity
    Show

  • Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Default

    To set the runtime status of the <code>net.ipv4.conf.default.log_martians</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.log_martians=1</pre> To mak...
    Rule Unknown Severity
    Show

  • Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Default

    To set the runtime status of the <code>net.ipv4.conf.default.rp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.rp_filter=1</pre> To make sure...
    Rule Medium Severity
    Show

  • Configure Sending and Accepting Shared Media Redirects by Default

    To set the runtime status of the <code>net.ipv4.conf.default.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.shared_media=<xccdf-1.2:sub...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default

    To set the runtime status of the <code>net.ipv4.conf.default.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0</pre> To...
    Rule Medium Severity
    Show

  • Wireless Networking

    Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless networking hardware is much more likely to be include...
    Group
    Show

  • Verify that All World-Writable Directories Have Sticky Bits Set

    When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may ...
    Rule Medium Severity
    Show

  • Enable Kernel Parameter to Enforce DAC on Hardlinks

    To set the runtime status of the <code>fs.protected_hardlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protected_hardlinks=1</pre> To make sure that the setting ...
    Rule Medium Severity
    Show

  • Verify Group Who Owns Backup passwd File

    To properly set the group owner of /etc/passwd-, run the command: 
    $ sudo chgrp root /etc/passwd-
    Rule Medium Severity
    Show

  • Verify User Who Owns shadow File

    To properly set the owner of /etc/shadow, run the command: 
    $ sudo chown root /etc/shadow
    Rule Medium Severity
    Show

  • Verify Permissions on Backup gshadow File

    To properly set the permissions of /etc/gshadow-, run the command: 
    $ sudo chmod 0000 /etc/gshadow-
    Rule Medium Severity
    Show

  • Verify Permissions on Backup shadow File

    To properly set the permissions of /etc/shadow-, run the command: 
    $ sudo chmod 0000 /etc/shadow-
    Rule Medium Severity
    Show

  • Verify that Shared Library Directories Have Root Ownership

    System-wide shared library files, which are linked to executables during process load time or run time, are stored in the following directories by default: <pre>/lib /lib64 /usr/lib /usr/lib64 </pr...
    Rule Medium Severity
    Show

  • Verify that Shared Library Directories Have Restrictive Permissions

    System-wide shared library directories, which contain are linked to executables during process load time or run time, are stored in the following directories by default: <pre>/lib /lib64 /usr/lib /...
    Rule Medium Severity
    Show

  • Disable the Automounter

    The <code>autofs</code> daemon mounts and unmounts filesystems, such as user home directories shared via NFS, on demand. In addition, autofs can be used to handle removable media, and the default c...
    Rule Medium Severity
    Show

  • Disable Core Dumps for All Users

    To disable core dumps for all users, add the following line to <code>/etc/security/limits.conf</code>, or to a file within the <code>/etc/security/limits.d/</code> directory: <pre>* hard core...
    Rule Medium Severity
    Show

  • Disable Core Dumps for SUID programs

    To set the runtime status of the <code>fs.suid_dumpable</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.suid_dumpable=0</pre> To make sure that the setting is persisten...
    Rule Medium Severity
    Show

  • Enable Randomized Layout of Virtual Address Space

    To set the runtime status of the <code>kernel.randomize_va_space</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.randomize_va_space=2</pre> To make sure that the se...
    Rule Medium Severity
    Show

  • SELinux

    SELinux is a feature of the Linux kernel which can be used to guard against misconfigured or compromised programs. SELinux enforces the idea that programs should be limited in what files they can a...
    Group
    Show

  • Ensure SELinux is Not Disabled

    The SELinux state should be set to <code>enforcing</code> or <code>permissive</code> at system boot time. In the file <code>/etc/selinux/config</code>, add or correct the following line to configur...
    Rule High Severity
    Show

  • Disable Network File Systems (netfs)

    The netfs script manages the boot-time mounting of several types of networked filesystems, of which NFS and Samba are the most common. If these filesystem types are not in use, the script can be di...
    Rule Unknown Severity
    Show

  • Ensure SELinux State is Enforcing

    The SELinux state should be set to <code><xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_selinux_state" use="legacy"></xccdf-1.2:sub></code> at system boot time. In the file <code>/et...
    Rule High Severity
    Show

  • Services

    The best protection against vulnerable software is running less software. This section describes how to review the software which Anolis OS 23 installs on a system and disable software which is not...
    Group
    Show

  • Disable Automatic Bug Reporting Tool (abrtd)

    The Automatic Bug Reporting Tool (<code>abrtd</code>) daemon collects and reports crash data when an application crash is detected. Using a variety of plugins, abrtd can email crash reports to syst...
    Rule Medium Severity
    Show

  • Enable cron Service

    The <code>crond</code> service is used to execute commands at preconfigured times. It is required by almost all systems to perform necessary maintenance tasks, such as notifying root of system acti...
    Rule Medium Severity
    Show

  • Enable cron Service

    The <code>crond</code> service is used to execute commands at preconfigured times. It is required by almost all systems to perform necessary maintenance tasks, such as notifying root of system acti...
    Rule Medium Severity
    Show

  • Disable At Service (atd)

    The <code>at</code> and <code>batch</code> commands can be used to schedule tasks that are meant to be executed only once. This allows delayed execution in a manner similar to cron, except that it ...
    Rule Medium Severity
    Show

  • Verify Owner on cron.weekly

    To properly set the owner of /etc/cron.weekly, run the command: 
    $ sudo chown root /etc/cron.weekly
    Rule Medium Severity
    Show

  • Verify Permissions on cron.d

    To properly set the permissions of /etc/cron.d, run the command: 
    $ sudo chmod 0700 /etc/cron.d
    Rule Medium Severity
    Show

  • Restrict at and cron to Authorized Users if Necessary

    The <code>/etc/cron.allow</code> and <code>/etc/at.allow</code> files contain lists of users who are allowed to use <code>cron</code> and at to delay execution of processes. If these files exist an...
    Group
    Show

  • Verify Group Who Owns /etc/cron.allow file

    If <code>/etc/cron.allow</code> exists, it must be group-owned by <code>root</code>. To properly set the group owner of <code>/etc/cron.allow</code>, run the command: <pre>$ sudo chgrp root /etc/c...
    Rule Medium Severity
    Show

  • Disable rpcbind Service

    The rpcbind utility maps RPC services to the ports on which they listen. RPC processes notify rpcbind when they start, registering the ports they are listening on and the RPC program numbers they e...
    Rule Low Severity
    Show

  • Minimize the DHCP-Configured Options

    Create the file <code>/etc/dhcp/dhclient.conf</code>, and add an appropriate setting for each of the ten configuration settings which can be obtained via DHCP. For each setting, do one of the follo...
    Rule Unknown Severity
    Show

  • Configure Firewalls to Protect the FTP Server

    By default, <code>iptables</code> blocks access to the ports used by the web server. To configure <code>iptables</code> to allow port 21 traffic, one must edit <code>/etc/sysconfig/iptables</code>...
    Rule Unknown Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules