Skip to content
ATO Pathways
  Log In

Guide to the Secure Configuration of SUSE Linux Enterprise 15

Rules, Groups, and Values defined within the XCCDF Benchmark

  • SSH Max Keep Alive Count

    Specify the maximum number of idle message counts before session is terminated.
    Value
    Show

  • Install the OpenSSH Server Package

    The <code>openssh-server</code> package should be installed. The <code>openssh-server</code> package can be installed with the following command: <...
    Rule Medium Severity
    Show

  • Install the OpenSSH Client and Server Package

    The <code>openssh</code> package should be installed. The <code>openssh</code> package can be installed with the following command: <pre> $ sudo zy...
    Rule Medium Severity
    Show

  • Remove the OpenSSH Server Package

    The <code>openssh-server</code> package should be removed. The <code>openssh-server</code> package can be removed with the following command: <pre>...
    Rule Medium Severity
    Show

  • Remove the OpenSSH Client and Server Package

    The <code>openssh</code> package should be removed. The <code>openssh</code> package can be removed with the following command: <pre> $ sudo zypper...
    Rule Medium Severity
    Show

  • Enable the OpenSSH Service

    The SSH server service, sshd, is commonly needed. The <code>sshd</code> service can be enabled with the following command: <pre>$ sudo systemctl e...
    Rule Medium Severity
    Show

  • Disable SSH Server If Possible

    The SSH server service, sshd, is commonly needed. However, if it can be disabled, do so. This is unusual, as SSH is a common method for encrypted ...
    Rule High Severity
    Show

  • Verify Group Who Owns SSH Server config file

    To properly set the group owner of /etc/ssh/sshd_config, run the command: 
    $ sudo chgrp root /etc/ssh/sshd_config
    Rule Medium Severity
    Show

  • Verify Group Ownership on SSH Server Private *_key Key Files

    SSH server private keys, files that match the /etc/ssh/*_key glob, must be group-owned by root group.
    Rule Medium Severity
    Show

  • Verify Group Ownership on SSH Server Public *.pub Key Files

    SSH server public keys, files that match the /etc/ssh/*.pub glob, must be group-owned by root group.
    Rule Medium Severity
    Show

  • Verify Owner on SSH Server config file

    To properly set the owner of /etc/ssh/sshd_config, run the command: 
    $ sudo chown root /etc/ssh/sshd_config
    Rule Medium Severity
    Show

  • Verify Ownership on SSH Server Private *_key Key Files

    SSH server private keys, files that match the /etc/ssh/*_key glob, must be owned by root user.
    Rule Medium Severity
    Show

  • Verify Permissions on SSH Server config file

    To properly set the permissions of /etc/ssh/sshd_config, run the command: 
    $ sudo chmod 0600 /etc/ssh/sshd_config
    Rule Medium Severity
    Show

  • Verify Permissions on SSH Server Private *_key Key Files

    SSH server private keys - files that match the <code>/etc/ssh/*_key</code> glob, have to have restricted permissions. If those files are owned by t...
    Rule Medium Severity
    Show

  • Verify Permissions on SSH Server Public *.pub Key Files

    To properly set the permissions of /etc/ssh/*.pub, run the command: 
    $ sudo chmod 0644 /etc/ssh/*.pub
    Rule Medium Severity
    Show

  • Remove SSH Server iptables Firewall exception (Unusual)

    By default, inbound connections to SSH's port are allowed. If the SSH server is not being used, this exception should be removed from the firewall ...
    Rule Unknown Severity
    Show

  • Configure OpenSSH Client if Necessary

    The following configuration changes apply to the SSH client. They can improve security parameters relwevant to the client user, e.g. increasing ent...
    Group
    Show

  • Configure OpenSSH Server if Necessary

    If the system needs to act as an SSH server, then certain changes should be made to the OpenSSH daemon configuration file <code>/etc/ssh/sshd_confi...
    Group
    Show

  • SSH RekeyLimit - size

    Specify the size component of the rekey limit.
    Value
    Show

  • SSH RekeyLimit - size

    Specify the size component of the rekey limit.
    Value
    Show

  • SSH Compression Setting

    Specify the compression setting for SSH connections.
    Value
    Show

  • SSH Privilege Separation Setting

    Specify whether and how sshd separates privileges when handling incoming network connections.
    Value
    Show

  • SSH LoginGraceTime setting

    Configure parameters for how long the servers stays connected before the user has successfully logged in
    Value
    Show

  • SSH MaxStartups setting

    Configure parameters for maximum concurrent unauthenticated connections to the SSH daemon.
    Value
    Show

  • Set SSH Client Alive Count Max to zero

    The SSH server sends at most <code>ClientAliveCountMax</code> messages during a SSH session and waits for a response from the SSH client. The optio...
    Rule Medium Severity
    Show

  • Set SSH Client Alive Count Max

    The SSH server sends at most <code>ClientAliveCountMax</code> messages during a SSH session and waits for a response from the SSH client. The optio...
    Rule Medium Severity
    Show

  • Disable SSH Support for .rhosts Files

    SSH can emulate the behavior of the obsolete rsh command in allowing users to enable insecure access to their accounts via <code>.rhosts</code> fil...
    Rule Medium Severity
    Show

  • Set SSH Client Alive Interval

    SSH allows administrators to set a network responsiveness timeout interval. After this interval has passed, the unresponsive client will be automat...
    Rule Medium Severity
    Show

  • Disable Host-Based Authentication

    SSH's cryptographic host-based authentication is more secure than <code>.rhosts</code> authentication. However, it is not recommended that hosts un...
    Rule Medium Severity
    Show

  • Allow Only SSH Protocol 2

    Only SSH protocol version 2 connections should be permitted. The default setting in <code>/etc/ssh/sshd_config</code> is correct, and can be verifi...
    Rule High Severity
    Show

  • Disable Compression Or Set Compression to delayed

    Compression is useful for slow network connections over long distances but can cause performance issues on local LANs. If use of compression is req...
    Rule Medium Severity
    Show

  • Disable SSH Access via Empty Passwords

    Disallow SSH login with empty passwords. The default SSH configuration disables logins with empty passwords. The appropriate configuration is used ...
    Rule High Severity
    Show

  • Disable GSSAPI Authentication

    Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms like GSSAPI. <br> The default SSH configuration disallows ...
    Rule Medium Severity
    Show

  • Disable Kerberos Authentication

    Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms like Kerberos. <br> The default SSH configuration disallow...
    Rule Medium Severity
    Show

  • Disable PubkeyAuthentication Authentication

    Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms. To disable PubkeyAuthentication authentication, add or co...
    Rule Medium Severity
    Show

  • Disable SSH Support for Rhosts RSA Authentication

    SSH can allow authentication through the obsolete rsh command through the use of the authenticating user's SSH keys. This should be disabled. <br><...
    Rule Medium Severity
    Show

  • Disable SSH Root Login

    The root user should never be allowed to login to a system directly over a network. To disable root login via SSH, add or correct the following lin...
    Rule Medium Severity
    Show

  • Disable SSH root Login with a Password (Insecure)

    To disable password-based root logins over SSH, add or correct the following line in <code>/etc/ssh/sshd_config</code>: <pre>PermitRootLogin pro...
    Rule Medium Severity
    Show

  • Disable SSH TCP Forwarding

    The <code>AllowTcpForwarding</code> parameter specifies whether TCP forwarding is permitted. To disable TCP forwarding, add or correct the followin...
    Rule Medium Severity
    Show

  • Disable SSH Support for User Known Hosts

    SSH can allow system users to connect to systems if a cache of the remote systems public keys is available. This should be disabled. <br><br> To e...
    Rule Medium Severity
    Show

  • Disable X11 Forwarding

    The X11Forwarding parameter provides the ability to tunnel X11 traffic through the connection to enable remote graphic connections. SSH has the cap...
    Rule Medium Severity
    Show

  • Do Not Allow SSH Environment Options

    Ensure that users are not able to override environment variables of the SSH daemon. <br> The default SSH configuration disables environment process...
    Rule Medium Severity
    Show

  • Enable GSSAPI Authentication

    Sites setup to use Kerberos or other GSSAPI Authenticaion require setting sshd to accept this authentication. To enable GSSAPI authentication, add ...
    Rule Medium Severity
    Show

  • Enable PAM

    UsePAM Enables the Pluggable Authentication Module interface. If set to “yes” this will enable PAM authentication using ChallengeResponseAuthentica...
    Rule Medium Severity
    Show

  • Enable Public Key Authentication

    Enable SSH login with public keys. <br> The default SSH configuration enables authentication based on public keys. The appropriate configuration is...
    Rule Medium Severity
    Show

  • Enable Use of Strict Mode Checking

    SSHs <code>StrictModes</code> option checks file and ownership permissions in the user's home directory <code>.ssh</code> folder before accepting l...
    Rule Medium Severity
    Show

  • Enable SSH Warning Banner

    To enable the warning banner and ensure it is consistent across the system, add or correct the following line in <code>/etc/ssh/sshd_config</code...
    Rule Medium Severity
    Show

  • Enable SSH Warning Banner

    To enable the warning banner and ensure it is consistent across the system, add or correct the following line in <code>/etc/ssh/sshd_config</code>...
    Rule Medium Severity
    Show

  • Enable Encrypted X11 Forwarding

    By default, remote X11 connections are not encrypted when initiated by users. SSH has the capability to encrypt remote X11 connections when SSH's <...
    Rule High Severity
    Show

  • Limit Users' SSH Access

    By default, the SSH configuration allows any user with an account to access the system. There are several options available to limit which users an...
    Rule Unknown Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules