Skip to content
ATO Pathways
  Log In

Guide to the Secure Configuration of SUSE Linux Enterprise 12

Rules, Groups, and Values defined within the XCCDF Benchmark

  • Enable the SuSEfirewall 2

    The SuSEfirewall2 service can be enabled with the following command: 
    $ sudo systemctl enable SuSEfirewall2.service
    Rule Medium Severity
    Show

  • Enable DoS Protections in SuSEfirewall2

    The <code>SuSEfirewall2</code> package can be installed with the following command: <pre> $ sudo zypper install SuSEfirewall2</pre> The <code>SuSE...
    Rule Medium Severity
    Show

  • Only Allow Authorized Network Services in SuSEfirewall2

    The <code>SuSEfirewall2</code> package can be installed with the following command: <pre> $ sudo zypper install SuSEfirewall2</pre> The <code>SuSE...
    Rule Medium Severity
    Show

  • Uncomplicated Firewall (ufw)

    The Linux kernel in Ubuntu provides a packet filtering system called netfilter, and the traditional interface for manipulating netfilter are the ip...
    Group
    Show

  • Verify ufw Enabled

    The ufw service can be enabled with the following command: 
    $ sudo systemctl enable ufw.service
    Rule Medium Severity
    Show

  • Uncommon Network Protocols

    The system includes support for several network protocols which are not commonly used. Although security vulnerabilities in kernel networking code ...
    Group
    Show

  • Disable DCCP Support

    The Datagram Congestion Control Protocol (DCCP) is a relatively new transport layer protocol, designed to support streaming media and telephony. T...
    Rule Medium Severity
    Show

  • Disable RDS Support

    The Reliable Datagram Sockets (RDS) protocol is a transport layer protocol designed to provide reliable high-bandwidth, low-latency communications ...
    Rule Low Severity
    Show

  • Disable TIPC Support

    The Transparent Inter-Process Communication (TIPC) protocol is designed to provide communications between nodes in a cluster. To configure the sys...
    Rule Low Severity
    Show

  • Wireless Networking

    Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless net...
    Group
    Show

  • Disable Wireless Through Software Configuration

    If it is impossible to remove the wireless hardware from the device in question, disable as much of it as possible through software. The following ...
    Group
    Show

  • Deactivate Wireless Network Interfaces

    Deactivating wireless network interfaces should prevent normal usage of the wireless capability. <br><br> Configure the system to disable wireless...
    Rule Medium Severity
    Show

  • Disable Unused Interfaces

    Network interfaces expand the attack surface of the system. Unused interfaces are not monitored or controlled, and should be disabled. <br><br> If...
    Group
    Show

  • Transport Layer Security Support

    Support for Transport Layer Security (TLS), and its predecessor, the Secure Sockets Layer (SSL), is included in Red Hat Enterprise Linux in the Ope...
    Group
    Show

  • File Permissions and Masks

    Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which t...
    Group
    Show

  • Verify Permissions on Important Files and Directories

    Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses impo...
    Group
    Show

  • Ensure All World-Writable Directories Are Owned by root User

    All directories in local partitions which are world-writable should be owned by root. If any world-writable directories are not owned by root, this...
    Rule Medium Severity
    Show

  • Verify Group Who Owns Backup group File

    To properly set the group owner of /etc/group-, run the command: 
    $ sudo chgrp root /etc/group-
    Rule Medium Severity
    Show

  • Ensure All World-Writable Directories Are Group Owned by a System Account

    All directories in local partitions which are world-writable should be group owned by root or another system account. If any world-writable directo...
    Rule Medium Severity
    Show

  • Verify that system commands directories have root as a group owner

    System commands are stored in the following directories: by default: <pre>/bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin </pre> ...
    Rule Medium Severity
    Show

  • Verify that system commands directories have root ownership

    System commands are stored in the following directories by default: <pre>/bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin </pre> A...
    Rule Medium Severity
    Show

  • Verify that local System.map file (if exists) is readable only by root

    Files containing sensitive informations should be protected by restrictive permissions. Most of the time, there is no need that these files need ...
    Rule Unknown Severity
    Show

  • Ensure All SGID Executables Are Authorized

    The SGID (set group id) bit should be set only on files that were installed via authorized means. A straightforward means of identifying unauthoriz...
    Rule Medium Severity
    Show

  • Ensure All SUID Executables Are Authorized

    The SUID (set user id) bit should be set only on files that were installed via authorized means. A straightforward means of identifying unauthorize...
    Rule Medium Severity
    Show

  • Ensure All Files Are Owned by a User

    If any files are not owned by a user, then the cause of their lack of ownership should be investigated. Following this, the files should be deleted...
    Rule Medium Severity
    Show

  • Verify permissions of log files

    Any operating system providing too much information in error messages risks compromising the data and security of the structure, and content of err...
    Rule Medium Severity
    Show

  • Enable Kernel Parameter to Enforce DAC on Hardlinks

    To set the runtime status of the <code>fs.protected_hardlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protecte...
    Rule Medium Severity
    Show

  • Enable Kernel Parameter to Enforce DAC on Symlinks

    To set the runtime status of the <code>fs.protected_symlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protected...
    Rule Medium Severity
    Show

  • Verify Permissions on Files with Local Account Information and Credentials

    The default restrictive permissions for files which act as important security databases such as <code>passwd</code>, <code>shadow</code>, <code>gro...
    Group
    Show

  • Verify Permissions and Ownership of Old Passwords File

    To properly set the owner of <code>/etc/security/opasswd</code>, run the command: <pre>$ sudo chown root /etc/security/opasswd </pre> To properly ...
    Rule Medium Severity
    Show

  • Verify User Who Owns Backup shadow File

    To properly set the group owner of /etc/shadow-, run the command: 
    $ sudo chgrp shadow /etc/shadow-
    Rule Medium Severity
    Show

  • Verify Group Who Owns group File

    To properly set the group owner of /etc/group, run the command: 
    $ sudo chgrp root /etc/group
    Rule Medium Severity
    Show

  • Verify Group Who Owns gshadow File

    To properly set the group owner of /etc/gshadow, run the command: 
    $ sudo chgrp root /etc/gshadow
    Rule Medium Severity
    Show

  • Verify Group Who Owns passwd File

    To properly set the group owner of /etc/passwd, run the command: 
    $ sudo chgrp root /etc/passwd
    Rule Medium Severity
    Show

  • Verify Group Who Owns shadow File

    To properly set the group owner of /etc/shadow, run the command: 
    $ sudo chgrp shadow /etc/shadow
    Rule Medium Severity
    Show

  • Verify User Who Owns Backup group File

    To properly set the owner of /etc/group-, run the command: 
    $ sudo chown root /etc/group-
    Rule Medium Severity
    Show

  • Verify User Who Owns Backup gshadow File

    To properly set the owner of /etc/gshadow-, run the command: 
    $ sudo chown root /etc/gshadow-
    Rule Medium Severity
    Show

  • Verify User Who Owns Backup passwd File

    To properly set the owner of /etc/passwd-, run the command: 
    $ sudo chown root /etc/passwd-
    Rule Medium Severity
    Show

  • Verify Group Who Owns Backup shadow File

    To properly set the owner of /etc/shadow-, run the command: 
    $ sudo chown root /etc/shadow-
    Rule Medium Severity
    Show

  • Verify User Who Owns group File

    To properly set the owner of /etc/group, run the command: 
    $ sudo chown root /etc/group
    Rule Medium Severity
    Show

  • Verify User Who Owns gshadow File

    To properly set the owner of /etc/gshadow, run the command: 
    $ sudo chown root /etc/gshadow
    Rule Medium Severity
    Show

  • Verify User Who Owns passwd File

    To properly set the owner of /etc/passwd, run the command: 
    $ sudo chown root /etc/passwd
    Rule Medium Severity
    Show

  • Verify User Who Owns shadow File

    To properly set the owner of /etc/shadow, run the command: 
    $ sudo chown root /etc/shadow
    Rule Medium Severity
    Show

  • Verify Permissions on Backup group File

    To properly set the permissions of /etc/group-, run the command: 
    $ sudo chmod 0644 /etc/group-
    Rule Medium Severity
    Show

  • Verify Permissions on Backup gshadow File

    To properly set the permissions of /etc/gshadow-, run the command: 
    $ sudo chmod 0000 /etc/gshadow-
    Rule Medium Severity
    Show

  • Verify Permissions on Backup passwd File

    To properly set the permissions of /etc/passwd-, run the command: 
    $ sudo chmod 0644 /etc/passwd-
    Rule Medium Severity
    Show

  • Verify Permissions on Backup shadow File

    To properly set the permissions of /etc/shadow-, run the command: 
    $ sudo chmod 0000 /etc/shadow-
    Rule Medium Severity
    Show

  • Verify Permissions on gshadow File

    To properly set the permissions of /etc/gshadow, run the command: 
    $ sudo chmod 0000 /etc/gshadow
    Rule Medium Severity
    Show

  • Verify Permissions on passwd File

    To properly set the permissions of /etc/passwd, run the command: 
    $ sudo chmod 0644 /etc/passwd
    Rule Medium Severity
    Show

  • Verify Permissions on shadow File

    To properly set the permissions of /etc/shadow, run the command: 
    $ sudo chmod 0640 /etc/shadow
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules