Guide to the Secure Configuration of Red Hat Enterprise Linux CoreOS 4
Rules, Groups, and Values defined within the XCCDF Benchmark
-
Disable Recovery Booting
Red Hat Enterprise Linux CoreOS 4 systems support an "recovery boot" option that can be used to prevent services from being started. The <code>GRUB_DISABLE_RECOVERY</code> configuration option in <...Rule Medium Severity -
Configure L1 Terminal Fault mitigations
L1 Terminal Fault (L1TF) is a hardware vulnerability which allows unprivileged speculative access to data which is available in the Level 1 Data Cache when the page table entry isn't present. Sele...Rule High Severity -
Configure the confidence in TPM for entropy
The TPM security chip that is available in most modern systems has a hardware RNG. It is also used to feed the entropy pool, but generally not credited entropy. Use <code>rng_core.default_quality<...Rule Low Severity -
Ensure debug-shell service is not enabled during boot
systemd's <code>debug-shell</code> service is intended to diagnose systemd related boot issues with various <code>systemctl</code> commands. Once enabled and following a system reboot, the root she...Rule Medium Severity -
Verify /boot/grub2/grub.cfg Group Ownership
The file <code>/boot/grub2/grub.cfg</code> should be group-owned by the <code>root</code> group to prevent destruction or modification of the file. To properly set the group owner of <code>/boot/g...Rule Medium Severity -
Verify /boot/grub2/user.cfg Group Ownership
The file <code>/boot/grub2/user.cfg</code> should be group-owned by the <code>root</code> group to prevent reading or modification of the file. To properly set the group owner of <code>/boot/grub2...Rule Medium Severity -
Verify /boot/grub2/grub.cfg User Ownership
The file <code>/boot/grub2/grub.cfg</code> should be owned by the <code>root</code> user to prevent destruction or modification of the file. To properly set the owner of <code>/boot/grub2/grub.cfg...Rule Medium Severity -
Verify /boot/grub2/user.cfg User Ownership
The file <code>/boot/grub2/user.cfg</code> should be owned by the <code>root</code> user to prevent reading or modification of the file. To properly set the owner of <code>/boot/grub2/user.cfg</co...Rule Medium Severity -
Verify /boot/grub2/grub.cfg Permissions
File permissions for <code>/boot/grub2/grub.cfg</code> should be set to 600. To properly set the permissions of <code>/boot/grub2/grub.cfg</code>, run the command: <pre>$ sudo chmod 600 /boot/grub...Rule Medium Severity -
Verify Permissions On /etc/ipsec.d Directory
To properly set the permissions of/etc/ipsec.d, run the command:$ sudo chmod 0700 /etc/ipsec.d
Rule Medium Severity -
Ensure Proper Configuration of Log Files
The file <code>/etc/rsyslog.conf</code> controls where log message are written. These are controlled by lines called <i>rules</i>, which consist of a <i>selector</i> and an <i>action</i>. These rul...Group -
Ensure Log Files Are Owned By Appropriate Group
The group-owner of all log files written by <code>rsyslog</code> should be <code>root</code>. These log files are determined by the second part of each Rule line in <code>/etc/rsyslog.conf</code> a...Rule Medium Severity -
Ensure Log Files Are Owned By Appropriate User
The owner of all log files written by <code>rsyslog</code> should be <code>root</code>. These log files are determined by the second part of each Rule line in <code>/etc/rsyslog.conf</code> and t...Rule Medium Severity -
Enable systemd-journald Service
The <code>systemd-journald</code> service is an essential component of systemd. The <code>systemd-journald</code> service can be enabled with the following manifest: <pre> --- apiVersion: machinec...Rule Medium Severity -
Ensure All Logs are Rotated by logrotate
Edit the file <code>/etc/logrotate.d/syslog</code>. Find the first line, which should look like this (wrapped for clarity): <pre>/var/log/messages /var/log/secure /var/log/maillog /var/log/spoole...Group -
Configure rsyslogd to Accept Remote Messages If Acting as a Log Server
By default, <code>rsyslog</code> does not listen over the network for log messages. If needed, modules can be enabled to allow the rsyslog daemon to receive messages from other systems and for the ...Group -
Verify Group Who Owns /etc/ipsec.conf File
To properly set the group owner of/etc/ipsec.conf, run the command:$ sudo chgrp root /etc/ipsec.conf
Rule Medium Severity -
Enable syslog-ng Service
The <code>syslog-ng</code> service (in replacement of rsyslog) provides syslog-style logging by default on Debian. The <code>syslog-ng</code> service can be enabled with the following manifest: <p...Rule Medium Severity -
Rsyslog Logs Sent To Remote Host
If system logs are to be useful in detecting malicious activities, it is necessary to send logs to a remote server. An intruder who has compromised the root account on a system may delete the log e...Group -
Prevent non-Privileged Users from Modifying Network Interfaces using nmcli
By default, non-privileged users are given permissions to modify networking interfaces and configurations using the <code>nmcli</code> command. Non-privileged users should not be making configurati...Rule Medium Severity -
Install firewalld Package
Thefirewalldpackage can be installed with the following command:$ sudo dnf install firewalld
Rule Medium Severity -
Verify firewalld Enabled
The <code>firewalld</code> service can be enabled with the following manifest: <pre> --- apiVersion: machineconfiguration.openshift.io/v1 kind: MachineConfig metadata: labels: machineconfigu...Rule Medium Severity -
Verify Group Who Owns /etc/ipsec.d Directory
To properly set the group owner of/etc/ipsec.d, run the command:$ sudo chgrp root /etc/ipsec.d
Rule Medium Severity -
Verify User Who Owns /etc/ipsec.d Directory
To properly set the owner of/etc/ipsec.d, run the command:$ sudo chown root /etc/ipsec.d
Rule Medium Severity -
Strengthen the Default Ruleset
The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in the configuration files <code>iptables</code> and <code>ip6tables</code> in t...Group -
Configure Accepting Router Advertisements on All IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.accept_ra</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.all.accept_ra=0</pre> To make sure that th...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.all.accept_source_route=0</pre> ...Rule Medium Severity -
Disable Accepting Packets Routed Between Local Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_local</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_local=0</pre> To make sure t...Rule Medium Severity -
Disable Accepting ICMP Redirects for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0</pre> To mak...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0</pre> ...Rule Medium Severity -
Configure Sending and Accepting Shared Media Redirects for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.shared_media=<xccdf-1.2:sub idref="...Rule Medium Severity -
Verify Permissions on /var/log/syslog File
To properly set the permissions of/var/log/syslog, run the command:$ sudo chmod 0640 /var/log/syslog
Rule Medium Severity -
Configure Kernel to Rate Limit Sending of Duplicate TCP Acknowledgments
Make sure that the system is configured to limit the maximal rate for sending duplicate acknowledgments in response to incoming TCP packets that are for an existing connection but that are invalid ...Rule Medium Severity -
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0</pre> To make su...Rule Medium Severity -
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0</pre> To...Rule Medium Severity -
Disable Kernel Parameter for IP Forwarding on IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.ip_forward</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.ip_forward=0</pre> To make sure that the setting is per...Rule Medium Severity -
nftables
<code>If firewalld or iptables are being used in your environment, please follow the guidance in their respective section and pass-over the guidance in this section.</code><br><br> nftables is a su...Group -
Verify Group Who Owns /etc/nftables Directory
To properly set the group owner of/etc/nftables, run the command:$ sudo chgrp root /etc/nftables
Rule Medium Severity -
Verify User Who Owns /etc/nftables Directory
To properly set the owner of/etc/nftables, run the command:$ sudo chown root /etc/nftables
Rule Medium Severity -
Verify Permissions On /etc/nftables Directory
To properly set the permissions of/etc/nftables, run the command:$ sudo chmod 0700 /etc/nftables
Rule Medium Severity -
Verify ufw Enabled
The <code>ufw</code> service can be enabled with the following manifest: <pre> --- apiVersion: machineconfiguration.openshift.io/v1 kind: MachineConfig metadata: labels: machineconfiguration...Rule Medium Severity -
Disable Bluetooth Service
The <code>bluetooth</code> service can be disabled with the following manifest: <pre> --- apiVersion: machineconfiguration.openshift.io/v1 kind: MachineConfig metadata: labels: machineconfig...Rule Medium Severity -
File Permissions and Masks
Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which they should not have access. <br> <br> Severa...Group -
Verify that All World-Writable Directories Have Sticky Bits Set
When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may ...Rule Medium Severity -
Verify that system commands directories have root as a group owner
System commands are stored in the following directories: by default: <pre>/bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin </pre> All these directories should have <code>root</code...Rule Medium Severity -
Verify that system commands directories have root ownership
System commands are stored in the following directories by default: <pre>/bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin </pre> All these directories should be owned by the <code>...Rule Medium Severity -
Verify Group Who Owns System.map Files
The System.map files are symbol map files generated during the compilation of the Linux kernel. They contain the mapping between kernel symbols and their corresponding memory addresses. These files...Rule Low Severity -
Verify User Who Owns /etc/crypttab File
To properly set the owner of/etc/crypttab, run the command:$ sudo chown root /etc/crypttab
Rule Medium Severity -
Verify User Who Owns System.map Files
The System.map files are symbol map files generated during the compilation of the Linux kernel. They contain the mapping between kernel symbols and their corresponding memory addresses. These files...Rule Low Severity -
Verify Permissions On /etc/crypttab File
To properly set the permissions of/etc/crypttab, run the command:$ sudo chmod 0600 /etc/crypttab
Rule Medium Severity
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.