Guide to the Secure Configuration of openSUSE
Rules, Groups, and Values defined within the XCCDF Benchmark
-
iptables and ip6tables
A host-based firewall called <code>netfilter</code> is included as part of the Linux kernel distributed with the system. It is activated by default. This firewall is controlled by the program <code...Group -
Strengthen the Default Ruleset
The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in the configuration files <code>iptables</code> and <code>ip6tables</code> in t...Group -
Disable Accepting Packets Routed Between Local Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_local</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_local=0</pre> To make sure t...Rule Medium Severity -
Configure Sending and Accepting Shared Media Redirects for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.shared_media=<xccdf-1.2:sub idref="...Rule Medium Severity -
Verify ufw Enabled
Theufwservice can be enabled with the following command:$ sudo systemctl enable ufw.service
Rule Medium Severity -
Disable RDS Support
The Reliable Datagram Sockets (RDS) protocol is a transport layer protocol designed to provide reliable high-bandwidth, low-latency communications between nodes in a cluster. To configure the syst...Rule Low Severity -
Verify that All World-Writable Directories Have Sticky Bits Set
When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may ...Rule Medium Severity -
Verify Permissions on System.map Files
The System.map files are symbol map files generated during the compilation of the Linux kernel. They contain the mapping between kernel symbols and their corresponding memory addresses. In general,...Rule Low Severity -
Enable Kernel Parameter to Enforce DAC on Hardlinks
To set the runtime status of the <code>fs.protected_hardlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protected_hardlinks=1</pre> To make sure that the setting ...Rule Medium Severity -
Verify User Who Owns Backup group File
To properly set the owner of/etc/group-, run the command:$ sudo chown root /etc/group-
Rule Medium Severity -
Verify Permissions on shadow File
To properly set the permissions of/etc/shadow, run the command:$ sudo chmod 0000 /etc/shadow
Rule Medium Severity -
Verify that System Executable Have Root Ownership
<pre>/bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin</pre> All these directories should be owned by the <code>root</code> user. If any directory <i>DIR</i> in these directories is foun...Rule Medium Severity -
Verify that System Executable Directories Have Restrictive Permissions
System executables are stored in the following directories by default: <pre>/bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin</pre> These directories should not be group-writable or worl...Rule Medium Severity -
Verify that Shared Library Directories Have Restrictive Permissions
System-wide shared library directories, which contain are linked to executables during process load time or run time, are stored in the following directories by default: <pre>/lib /lib64 /usr/lib /...Rule Medium Severity -
Configure Firewalls to Protect the FTP Server
By default, <code>iptables</code> blocks access to the ports used by the web server. To configure <code>iptables</code> to allow port 21 traffic, one must edit <code>/etc/sysconfig/iptables</code>...Rule Unknown Severity -
Disable Core Dumps
A core dump file is the memory image of an executable program when it was terminated by the operating system due to errant behavior. In most cases, only software developers legitimately need to acc...Group -
Disable Core Dumps for SUID programs
To set the runtime status of the <code>fs.suid_dumpable</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.suid_dumpable=0</pre> To make sure that the setting is persisten...Rule Medium Severity -
Restrict Exposed Kernel Pointer Addresses Access
To set the runtime status of the <code>kernel.kptr_restrict</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.kptr_restrict=<xccdf-1.2:sub idref="xccdf_org.ssgproject...Rule Medium Severity -
SELinux
SELinux is a feature of the Linux kernel which can be used to guard against misconfigured or compromised programs. SELinux enforces the idea that programs should be limited in what files they can a...Group -
Services
The best protection against vulnerable software is running less software. This section describes how to review the software which openSUSE installs on a system and disable software which is not nee...Group -
Disable Avahi Publishing
To prevent Avahi from publishing its records, edit <code>/etc/avahi/avahi-daemon.conf</code> and ensure the following line appears in the <code>[publish]</code> section: <pre>disable-publishing=yes...Rule Low Severity -
DHCP
The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server. <br> <br> This guide recommends configuring...Group -
Minimize the DHCP-Configured Options
Create the file <code>/etc/dhcp/dhclient.conf</code>, and add an appropriate setting for each of the ten configuration settings which can be obtained via DHCP. For each setting, do one of the follo...Rule Unknown Severity -
Disable Kerberos Authentication
Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms like Kerberos. <br> The default SSH configuration disallows authentication validation through Kerberos. The ...Rule Medium Severity -
Mail Server Software
Mail servers are used to send and receive email over the network. Mail is a very common service, and Mail Transfer Agents (MTAs) are obvious targets of network attack. Ensure that systems are not r...Group -
Disable Network File Systems (netfs)
The netfs script manages the boot-time mounting of several types of networked filesystems, of which NFS and Samba are the most common. If these filesystem types are not in use, the script can be di...Rule Unknown Severity -
Network Time Protocol
The Network Time Protocol is used to manage the system clock over a network. Computer clocks are not very accurate, so time will drift unpredictably on unmanaged systems. Central time protocols can...Group -
The Chrony package is installed
System time should be synchronized between all systems in an environment. This is typically done by establishing an authoritative time server or set of servers and having all systems synchronize th...Rule Medium Severity -
A remote time server for Chrony is configured
<code>Chrony</code> is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. M...Rule Medium Severity -
Obsolete Services
This section discusses a number of network-visible services which have historically caused problems for system security, and for which disabling or severely limiting the service has been the best a...Group -
SSH is required to be installed
Specify if the Policy requires SSH to be installed. Used by SSH Rules to determine if SSH should be uninstalled or configured.<br> A value of 0 means that the policy doesn't care if OpenSSH server ...Value -
Remove SSH Server iptables Firewall exception (Unusual)
By default, inbound connections to SSH's port are allowed. If the SSH server is not being used, this exception should be removed from the firewall configuration. <br> <br> Edit the files <co...Rule Unknown Severity -
Set SSH Client Alive Interval
SSH allows administrators to set a network responsiveness timeout interval. After this interval has passed, the unresponsive client will be automatically logged out. <br> <br> To set this t...Rule Medium Severity -
Disable X11 Forwarding
The X11Forwarding parameter provides the ability to tunnel X11 traffic through the connection to enable remote graphic connections. SSH has the capability to encrypt remote X11 connections when SSH...Rule Medium Severity -
Enable GSSAPI Authentication
Sites setup to use Kerberos or other GSSAPI Authenticaion require setting sshd to accept this authentication. To enable GSSAPI authentication, add or correct the following line in <code>/etc/ssh/...Rule Medium Severity -
Enable PAM
UsePAM Enables the Pluggable Authentication Module interface. If set to “yes” this will enable PAM authentication using ChallengeResponseAuthentication and PasswordAuthentication in addition to PAM...Rule Medium Severity -
Force frequent session key renegotiation
The <code>RekeyLimit</code> parameter specifies how often the session key of the is renegotiated, both in terms of amount of data that may be transmitted and the time elapsed.<br> To decrease the d...Rule Medium Severity -
Set LogLevel to INFO
The INFO parameter specifices that record login and logout activity will be logged. <br> The default SSH configuration sets the log level to INFO. The appropriate configuration is used if no value ...Rule Low Severity -
Make the auditd Configuration Immutable
If the <code>auditd</code> daemon is configured to use the <code>augenrules</code> program to read audit rules during daemon startup (the default), add the following line to a file with suffix <cod...Rule Medium Severity -
Record Events that Modify the System's Mandatory Access Controls in usr/share
If the <code>auditd</code> daemon is configured to use the <code>augenrules</code> program to read audit rules during daemon startup (the default), add the following line to a file with suffix <cod...Rule Medium Severity -
Record Events that Modify the System's Network Environment
If the <code>auditd</code> daemon is configured to use the <code>augenrules</code> program to read audit rules during daemon startup (the default), add the following lines to a file with suffix <co...Rule Medium Severity -
Ensure auditd Collects System Administrator Actions
At a minimum, the audit system should collect administrator actions for all users and root. If the <code>auditd</code> daemon is configured to use the <code>augenrules</code> program to read audit ...Rule Medium Severity -
System Audit Logs Must Have Mode 0750 or Less Permissive
If <code>log_group</code> in <code>/etc/audit/auditd.conf</code> is set to a group other than the <code>root</code> group account, change the mode of the audit log files with the following command...Rule Medium Severity -
Audit Configuration Files Must Be Owned By Group root
All audit configuration files must be owned by group root.chown :root /etc/audit/audit*.{rules,conf} /etc/audit/rules.d/*Rule Medium Severity -
Audit Configuration Files Must Be Owned By Root
All audit configuration files must be owned by root user. To properly set the owner of <code>/etc/audit/</code>, run the command: <pre>$ sudo chown root /etc/audit/ </pre> To properly set the own...Rule Medium Severity -
System Audit Logs Must Be Owned By Root
All audit logs must be owned by root user and group. By default, the path for audit log is <pre>/var/log/audit/</pre>. To properly set the owner of <code>/var/log/audit</code>, run the command: <p...Rule Medium Severity -
Record File Deletion Events by User
At a minimum, the audit system should collect file deletion events for all users and root. If the <code>auditd</code> daemon is configured to use the <code>augenrules</code> program to read audit r...Group -
Records Events that Modify Date and Time Information
Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time. All c...Group -
Record Events that Modify the System's Discretionary Access Controls - chmod
At a minimum, the audit system should collect file permission changes for all users and root. If the <code>auditd</code> daemon is configured to use the <code>augenrules</code> program to read audi...Rule Medium Severity -
Record Events that Modify the System's Discretionary Access Controls - fchmod
At a minimum, the audit system should collect file permission changes for all users and root. If the <code>auditd</code> daemon is configured to use the <code>augenrules</code> program to read audi...Rule Medium Severity
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.
Capacity
Modules