Skip to content
ATO Pathways
  Log In

Guide to the Secure Configuration of openSUSE

Rules, Groups, and Values defined within the XCCDF Benchmark

  • Proxy Server

    A proxy server is a very desirable target for a potential adversary because much (or all) sensitive data for a given infrastructure may flow throug...
    Group
    Show

  • Disable Squid if Possible

    If Squid was installed and activated, but the system does not need to act as a proxy server, then it should be disabled and removed.
    Group
    Show

  • Configure OpenSSH Client if Necessary

    The following configuration changes apply to the SSH client. They can improve security parameters relwevant to the client user, e.g. increasing ent...
    Group
    Show

  • Configure OpenSSH Server if Necessary

    If the system needs to act as an SSH server, then certain changes should be made to the OpenSSH daemon configuration file <code>/etc/ssh/sshd_confi...
    Group
    Show

  • SSH RekeyLimit - size

    Specify the size component of the rekey limit.
    Value
    Show

  • Samba(SMB) Microsoft Windows File Sharing Server

    When properly configured, the Samba service allows Linux systems to provide file and print sharing to Microsoft Windows systems. There are two soft...
    Group
    Show

  • Configure Samba if Necessary

    All settings for the Samba daemon can be found in <code>/etc/samba/smb.conf</code>. Settings are divided between a <code>[global]</code> configurat...
    Group
    Show

  • Restrict Printer Sharing

    By default, Samba utilizes the CUPS printing service to enable printer sharing with Microsoft Windows workstations. If there are no printers on the...
    Group
    Show

  • Restrict SMB File Sharing to Configured Networks

    Only users with local user accounts will be able to log in to Samba shares by default. Shares can be limited to particular users or network address...
    Group
    Show

  • Disable Samba if Possible

    Even after the Samba server package has been installed, it will remain disabled. Do not enable this service unless it is absolutely necessary to pr...
    Group
    Show

  • SNMP Server

    The Simple Network Management Protocol allows administrators to monitor the state of network devices, including computers. Older versions of SNMP w...
    Group
    Show

  • Disable SNMP Server if Possible

    The system includes an SNMP daemon that allows for its remote monitoring, though it not installed by default. If it was installed and activated but...
    Group
    Show

  • Configure SNMP Server if Necessary

    If it is necessary to run the snmpd agent on the system, some best practices should be followed to minimize the security risk from the installation...
    Group
    Show

  • SNMP read-only community string

    Specify the SNMP community string used for read-only access.
    Value
    Show

  • SNMP read-write community string

    Specify the SNMP community string used for read-write access.
    Value
    Show

  • SSH Server

    The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between tw...
    Group
    Show

  • SSH is required to be installed

    Specify if the Policy requires SSH to be installed. Used by SSH Rules to determine if SSH should be uninstalled or configured.<br> A value of 0 mea...
    Value
    Show

  • SSH Strong KEX by FIPS

    Specify the FIPS approved KEXs (Key Exchange Algorithms) algorithms that are used for methods in cryptography by which cryptographic keys are exch...
    Value
    Show

  • SSH Max Sessions Count

    Specify the maximum number of open sessions permitted.
    Value
    Show

  • SSH Max Keep Alive Count

    Specify the maximum number of idle message counts before session is terminated.
    Value
    Show

  • Install the OpenSSH Server Package

    The <code>openssh-server</code> package should be installed. The <code>openssh-server</code> package can be installed with the following command: <...
    Rule Medium Severity
    Show

  • Install the OpenSSH Client and Server Package

    The <code>openssh</code> package should be installed. The <code>openssh</code> package can be installed with the following command: <pre> $ sudo zy...
    Rule Medium Severity
    Show

  • Remove the OpenSSH Server Package

    The <code>openssh-server</code> package should be removed. The <code>openssh-server</code> package can be removed with the following command: <pre>...
    Rule Medium Severity
    Show

  • Remove the OpenSSH Client and Server Package

    The <code>openssh</code> package should be removed. The <code>openssh</code> package can be removed with the following command: <pre> $ sudo zypper...
    Rule Medium Severity
    Show

  • Disable SSH Server If Possible

    The SSH server service, sshd, is commonly needed. However, if it can be disabled, do so. This is unusual, as SSH is a common method for encrypted ...
    Rule High Severity
    Show

  • Verify Group Ownership on SSH Server Private *_key Key Files

    SSH server private keys, files that match the /etc/ssh/*_key glob, must be group-owned by root group.
    Rule Medium Severity
    Show

  • Verify Group Ownership on SSH Server Public *.pub Key Files

    SSH server public keys, files that match the /etc/ssh/*.pub glob, must be group-owned by root group.
    Rule Medium Severity
    Show

  • Verify Ownership on SSH Server Private *_key Key Files

    SSH server private keys, files that match the /etc/ssh/*_key glob, must be owned by root user.
    Rule Medium Severity
    Show

  • Verify Ownership on SSH Server Public *.pub Key Files

    SSH server public keys, files that match the /etc/ssh/*.pub glob, must be owned by root user.
    Rule Medium Severity
    Show

  • Verify Permissions on SSH Server Private *_key Key Files

    SSH server private keys - files that match the <code>/etc/ssh/*_key</code> glob, have to have restricted permissions. If those files are owned by t...
    Rule Medium Severity
    Show

  • Verify Permissions on SSH Server Public *.pub Key Files

    To properly set the permissions of /etc/ssh/*.pub, run the command: 
    $ sudo chmod 0644 /etc/ssh/*.pub
    Rule Medium Severity
    Show

  • Remove SSH Server iptables Firewall exception (Unusual)

    By default, inbound connections to SSH's port are allowed. If the SSH server is not being used, this exception should be removed from the firewall ...
    Rule Unknown Severity
    Show

  • SSH RekeyLimit - size

    Specify the size component of the rekey limit.
    Value
    Show

  • SSH Compression Setting

    Specify the compression setting for SSH connections.
    Value
    Show

  • SSH Privilege Separation Setting

    Specify whether and how sshd separates privileges when handling incoming network connections.
    Value
    Show

  • SSH LoginGraceTime setting

    Configure parameters for how long the servers stays connected before the user has successfully logged in
    Value
    Show

  • SSH MaxStartups setting

    Configure parameters for maximum concurrent unauthenticated connections to the SSH daemon.
    Value
    Show

  • SSSD ssh_known_hosts_timeout option

    Value of the ssh_known_hosts_timeout option in the [ssh] section of SSSD configuration file /etc/sssd/sssd.conf.
    Value
    Show

  • Set SSH Client Alive Count Max to zero

    The SSH server sends at most <code>ClientAliveCountMax</code> messages during a SSH session and waits for a response from the SSH client. The optio...
    Rule Medium Severity
    Show

  • Set SSH Client Alive Count Max

    The SSH server sends at most <code>ClientAliveCountMax</code> messages during a SSH session and waits for a response from the SSH client. The optio...
    Rule Medium Severity
    Show

  • Set SSH Client Alive Interval

    SSH allows administrators to set a network responsiveness timeout interval. After this interval has passed, the unresponsive client will be automat...
    Rule Medium Severity
    Show

  • Disable Host-Based Authentication

    SSH's cryptographic host-based authentication is more secure than <code>.rhosts</code> authentication. However, it is not recommended that hosts un...
    Rule Medium Severity
    Show

  • Allow Only SSH Protocol 2

    Only SSH protocol version 2 connections should be permitted. The default setting in <code>/etc/ssh/sshd_config</code> is correct, and can be verifi...
    Rule High Severity
    Show

  • Disable Compression Or Set Compression to delayed

    Compression is useful for slow network connections over long distances but can cause performance issues on local LANs. If use of compression is req...
    Rule Medium Severity
    Show

  • Disable SSH Access via Empty Passwords

    Disallow SSH login with empty passwords. The default SSH configuration disables logins with empty passwords. The appropriate configuration is used ...
    Rule High Severity
    Show

  • Disable GSSAPI Authentication

    Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms like GSSAPI. <br> The default SSH configuration disallows ...
    Rule Medium Severity
    Show

  • Read Sections Completely and in Order

    Each section may build on information and recommendations discussed in prior sections. Each section should be read and understood completely; instr...
    Group
    Show

  • Enable GSSAPI Authentication

    Sites setup to use Kerberos or other GSSAPI Authenticaion require setting sshd to accept this authentication. To enable GSSAPI authentication, add ...
    Rule Medium Severity
    Show

  • Disable Kerberos Authentication

    Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms like Kerberos. <br> The default SSH configuration disallow...
    Rule Medium Severity
    Show

  • Disable PubkeyAuthentication Authentication

    Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms. To disable PubkeyAuthentication authentication, add or co...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules