Skip to content
ATO Pathways
  Log In

Guide to the Secure Configuration of Oracle Linux 8

Rules, Groups, and Values defined within the XCCDF Benchmark

  • Log and Drop Packets with Suspicious Source Addresses

    Packets with non-routable source addresses should be rejected, as they may indicate spoofing. Because the modified policy will reject non-matching ...
    Group
    Show

  • IPv6

    The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the numb...
    Group
    Show

  • Disable Support for IPv6 Unless Needed

    Despite configuration that suggests support for IPv6 has been disabled, link-local IPv6 address auto-configuration occurs even when only an IPv4 ad...
    Group
    Show

  • Ensure IPv6 is disabled through kernel boot parameter

    To disable IPv6 protocol support in the Linux kernel, add the argument <code>ipv6.disable=1</code> to the default GRUB2 command line for the Linux ...
    Rule Low Severity
    Show

  • Disable IPv6 Networking Support Automatic Loading

    To prevent the IPv6 kernel module (<code>ipv6</code>) from binding to the IPv6 networking stack, add the following line to <code>/etc/modprobe.d/di...
    Rule Medium Severity
    Show

  • Disable Support for RPC IPv6

    RPC services for NFSv4 try to load transport modules for <code>udp6</code> and <code>tcp6</code> by default, even if IPv6 has been disabled in <cod...
    Rule Unknown Severity
    Show

  • Verify Group Who Owns Backup shadow File

    To properly set the owner of /etc/shadow-, run the command: 
    $ sudo chown root /etc/shadow-
    Rule Medium Severity
    Show

  • Use Privacy Extensions for Address

    To introduce randomness into the automatic generation of IPv6 addresses, add or correct the following line in <code>/etc/sysconfig/network-scripts/...
    Rule Unknown Severity
    Show

  • Manually Assign Global IPv6 Address

    To manually assign an IP address for an interface, edit the file <code>/etc/sysconfig/network-scripts/ifcfg-<i>interface</i></code>. Add or correct...
    Rule Unknown Severity
    Show

  • Disable IPv6 Addressing on IPv6 Interfaces by Default

    To disable support for (<code>ipv6</code>) addressing on interfaces by default add the following line to <code>/etc/sysctl.d/ipv6.conf</code> (or a...
    Rule Medium Severity
    Show

  • Configure IPv6 Settings if Necessary

    A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from ...
    Group
    Show

  • IPV6_AUTOCONF

    Toggle global IPv6 auto-configuration (only, if global forwarding is disabled)
    Value
    Show

  • net.ipv6.conf.all.accept_ra_defrtr

    Accept default router in router advertisements?
    Value
    Show

  • net.ipv6.conf.all.accept_ra_pinfo

    Accept prefix information in router advertisements?
    Value
    Show

  • net.ipv6.conf.all.accept_ra_rtr_pref

    Accept router preference in router advertisements?
    Value
    Show

  • net.ipv6.conf.all.accept_ra

    Accept all router advertisements?
    Value
    Show

  • net.ipv6.conf.all.accept_redirects

    Toggle ICMP Redirect Acceptance
    Value
    Show

  • net.ipv6.conf.all.accept_source_route

    Trackers could be using source-routed packets to generate traffic that seems to be intra-net, but actually was created outside and has been redirec...
    Value
    Show

  • net.ipv6.conf.all.autoconf

    Enable auto configuration on IPv6 interfaces
    Value
    Show

  • net.ipv6.conf.all.forwarding

    Toggle IPv6 Forwarding
    Value
    Show

  • net.ipv6.conf.all.max_addresses

    Maximum number of autoconfigured IPv6 addresses
    Value
    Show

  • net.ipv6.conf.all.router_solicitations

    Accept all router solicitations?
    Value
    Show

  • net.ipv6.conf.default.accept_ra_defrtr

    Accept default router in router advertisements?
    Value
    Show

  • net.ipv6.conf.default.accept_ra_pinfo

    Accept prefix information in router advertisements?
    Value
    Show

  • net.ipv6.conf.default.accept_ra_rtr_pref

    Accept router preference in router advertisements?
    Value
    Show

  • net.ipv6.conf.default.accept_ra

    Accept default router advertisements by default?
    Value
    Show

  • net.ipv6.conf.default.accept_redirects

    Toggle ICMP Redirect Acceptance By Default
    Value
    Show

  • net.ipv6.conf.default.accept_source_route

    Trackers could be using source-routed packets to generate traffic that seems to be intra-net, but actually was created outside and has been redirec...
    Value
    Show

  • net.ipv6.conf.default.autoconf

    Enable auto configuration on IPv6 interfaces
    Value
    Show

  • net.ipv6.conf.default.forwarding

    Toggle IPv6 default Forwarding
    Value
    Show

  • net.ipv6.conf.default.max_addresses

    Maximum number of autoconfigured IPv6 addresses
    Value
    Show

  • net.ipv6.conf.default.router_solicitations

    Accept all router solicitations by default?
    Value
    Show

  • Manually Assign IPv6 Router Address

    Edit the file <code>/etc/sysconfig/network-scripts/ifcfg-<i>interface</i></code>, and add or correct the following line (substituting your gateway ...
    Rule Unknown Severity
    Show

  • cron_system_cronjob_use_shares SELinux Boolean

    default - Default SELinux boolean setting.
    on - SELinux boolean is enabled.
    off - SELinux boolean is disabled.
    Value
    Show

  • Disable Accepting Router Advertisements on all IPv6 Interfaces by Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_ra</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w ne...
    Rule Medium Severity
    Show

  • cron_userdomain_transition SELinux Boolean

    default - Default SELinux boolean setting.
    on - SELinux boolean is enabled.
    off - SELinux boolean is disabled.
    Value
    Show

  • Configure Accepting Router Advertisements on All IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_ra</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ip...
    Rule Medium Severity
    Show

  • Configure Accepting Default Router in Router Advertisements on All IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_ra_defrtr</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...
    Rule Unknown Severity
    Show

  • Configure Accepting Prefix Information in Router Advertisements on All IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_ra_pinfo</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w ...
    Rule Unknown Severity
    Show

  • Configure Accepting Router Preference in Router Advertisements on All IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_ra_rtr_pref</code> kernel parameter, run the following command: <pre>$ sudo sysctl ...
    Rule Unknown Severity
    Show

  • Disable Accepting ICMP Redirects for All IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl...
    Rule Medium Severity
    Show

  • Configure Auto Configuration on All IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.autoconf</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv...
    Rule Unknown Severity
    Show

  • Disable Kernel Parameter for IPv6 Forwarding

    To set the runtime status of the <code>net.ipv6.conf.all.forwarding</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.i...
    Rule Medium Severity
    Show

  • Configure Maximum Number of Autoconfigured Addresses on All IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.max_addresses</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w ne...
    Rule Unknown Severity
    Show

  • Configure Denying Router Solicitations on All IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.router_solicitations</code> kernel parameter, run the following command: <pre>$ sudo sysct...
    Rule Unknown Severity
    Show

  • cups_execmem SELinux Boolean

    default - Default SELinux boolean setting.
    on - SELinux boolean is enabled.
    off - SELinux boolean is disabled.
    Value
    Show

  • Configure Accepting Default Router in Router Advertisements on All IPv6 Interfaces By Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_ra_defrtr</code> kernel parameter, run the following command: <pre>$ sudo sysct...
    Rule Unknown Severity
    Show

  • Verify User Who Owns group File

    To properly set the owner of /etc/group, run the command: 
    $ sudo chown root /etc/group
    Rule Medium Severity
    Show

  • Disable Accepting ICMP Redirects for All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules