Skip to content

HP FlexFabric Switch L2S Security Technical Implementation Guide

Rules, Groups, and Values defined within the XCCDF Benchmark

  • The HP FlexFabric Switch must have Dynamic ARP Inspection (DAI) enabled on all user VLANs.

    DAI intercepts Address Resolution Protocol (ARP) requests and verifies that each of these packets has a valid IP-to-MAC address binding before updating the local ARP cache and before forwarding the...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000003

    Group
  • The HP FlexFabric Switch must implement Rapid STP where VLANs span multiple switches with redundant links.

    Spanning Tree Protocol (STP) is implemented on bridges and switches to prevent layer 2 loops when a broadcast domain spans multiple bridges and switches and when redundant links are provisioned to ...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000004

    Group
  • SRG-NET-000512-L2S-000005

    Group
  • The HP FlexFabric Switch must have all trunk links enabled statically.

    When trunk negotiation is enabled via Dynamic Trunk Protocol (DTP), considerable time can be spent negotiating trunk settings (802.1q or ISL) when a node or interface is restored. While this negoti...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000007

    Group
  • The HP FlexFabric Switch must have all disabled switch ports assigned an unused VLAN.

    It is possible that a disabled port that is assigned to a user or management VLAN becomes enabled by accident or by an attacker and as a result gains access to that VLAN as a member.
    Rule Medium Severity
  • SRG-NET-000512-L2S-000008

    Group
  • The HP FlexFabric Switch must not have the default VLAN assigned to any host-facing switch ports.

    In a VLAN-based network, switches use the default VLAN (i.e., VLAN 1) for in-band management and to communicate with other networking devices using Spanning-Tree Protocol (STP), Dynamic Trunking Pr...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000009

    Group
  • The HP FlexFabric Switch must have the default VLAN pruned from all trunk ports that do not require it.

    The default VLAN (i.e., VLAN 1) is a special VLAN used for control plane traffic such as Spanning-Tree Protocol (STP), Dynamic Trunking Protocol (DTP), VLAN Trunking Protocol (VTP), and Port Aggreg...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000010

    Group
  • The HP FlexFabric Switch must not use the default VLAN for management traffic.

    Switches use the default VLAN (i.e., VLAN 1) for in-band management and to communicate with directly connected switches using Spanning-Tree Protocol (STP), Dynamic Trunking Protocol (DTP), VLAN Tru...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000012

    Group
  • The HP FlexFabric Switch must have the native VLAN assigned to a VLAN ID other than the default VLAN ID for all 802.1q trunk links.

    VLAN hopping can be initiated by an attacker who has access to a switch port belonging to the same VLAN as the native VLAN of the trunk link connecting to another switch that the victim is connecte...
    Rule Medium Severity
  • SRG-NET-000512-L2S-000013

    Group
  • The HP FlexFabric Switch must not have any access switch ports assigned to the native VLAN.

    Double encapsulation can be initiated by an attacker who has access to a switch port belonging to the native VLAN of the trunk port. Knowing the victim’s MAC address and with the victim attached to...
    Rule Medium Severity
  • The HP FlexFabric Switch must be configured to disable non-essential capabilities.

    A compromised switch introduces risk to the entire network infrastructure as well as data resources that are accessible via the network. The perimeter defense has no oversight or control of attacks...
    Rule Medium Severity
  • The HP FlexFabric Switch must manage excess bandwidth to limit the effects of packet flooding types of denial of service (DoS) attacks.

    Denial of service is a condition when a resource is not available for legitimate users. Packet flooding DDoS attacks are referred to as volumetric attacks and have the objective of overloading a ne...
    Rule Medium Severity

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules