Skip to content
Log In

Guide to the Secure Configuration of Fedora

Rules, Groups, and Values defined within the XCCDF Benchmark

  • Strengthen the Default Ruleset

    The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in configuration files under the <code>/etc/firewalld/services</code> and <code>...
    Group
    Show

  • IPSec Support

    Support for Internet Protocol Security (IPsec) is provided with Libreswan.
    Group
    Show

  • Install libreswan Package

    The libreswan package provides an implementation of IPsec and IKE, which permits the creation of secure tunnels over untrusted networks. The <code>libreswan</code> package can be installed with the...
    Rule Medium Severity
    Show

  • Verify Any Configured IPSec Tunnel Connections

    Libreswan provides an implementation of IPsec and IKE, which permits the creation of secure tunnels over untrusted networks. As such, IPsec can be used to circumvent certain network requirements su...
    Rule Medium Severity
    Show

  • iptables and ip6tables

    A host-based firewall called <code>netfilter</code> is included as part of the Linux kernel distributed with the system. It is activated by default. This firewall is controlled by the program <code...
    Group
    Show

  • Disable IPv6 Addressing on IPv6 Interfaces by Default

    To disable support for (<code>ipv6</code>) addressing on interfaces by default add the following line to <code>/etc/sysctl.d/ipv6.conf</code> (or another file in <code>/etc/sysctl.d</code>): <pre>n...
    Rule Medium Severity
    Show

  • Configure IPv6 Settings if Necessary

    A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from the network. From a security perspective, manually...
    Group
    Show

  • Verify ip6tables Enabled if Using IPv6

    The ip6tables service can be enabled with the following command: 
    $ sudo systemctl enable ip6tables.service
    Rule Medium Severity
    Show

  • Verify iptables Enabled

    The iptables service can be enabled with the following command: 
    $ sudo systemctl enable iptables.service
    Rule Medium Severity
    Show

  • Set Default ip6tables Policy for Incoming Packets

    To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in <code>/etc/sysconfig/ip6tables</code>: <pre...
    Rule Medium Severity
    Show

  • Strengthen the Default Ruleset

    The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in the configuration files <code>iptables</code> and <code>ip6tables</code> in t...
    Group
    Show

  • Set Default iptables Policy for Incoming Packets

    To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in <code>/etc/sysconfig/iptables</code>: <pre>...
    Rule Medium Severity
    Show

  • Set Default iptables Policy for Forwarded Packets

    To set the default policy to DROP (instead of ACCEPT) for the built-in FORWARD chain which processes packets that will be forwarded from one interface to another, add or correct the following line ...
    Rule Medium Severity
    Show

  • net.ipv6.conf.all.accept_ra_defrtr

    Accept default router in router advertisements?
    Value
    Show

  • IPv6

    The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the number of available addresses. Another important featu...
    Group
    Show

  • Disable Support for IPv6 Unless Needed

    Despite configuration that suggests support for IPv6 has been disabled, link-local IPv6 address auto-configuration occurs even when only an IPv4 address is assigned. The only way to effectively pre...
    Group
    Show

  • Disable IPv6 Networking Support Automatic Loading

    To prevent the IPv6 kernel module (<code>ipv6</code>) from binding to the IPv6 networking stack, add the following line to <code>/etc/modprobe.d/disabled.conf</code> (or another file in <code>/etc/...
    Rule Medium Severity
    Show

  • Disable Interface Usage of IPv6

    To disable interface usage of IPv6, add or correct the following lines in /etc/sysconfig/network: 
    NETWORKING_IPV6=no
IPV6INIT=no
    Rule Unknown Severity
    Show

  • Disable Support for RPC IPv6

    RPC services for NFSv4 try to load transport modules for <code>udp6</code> and <code>tcp6</code> by default, even if IPv6 has been disabled in <code>/etc/modprobe.d</code>. To prevent RPC services ...
    Rule Unknown Severity
    Show

  • Disable IPv6 Addressing on All IPv6 Interfaces

    To disable support for (<code>ipv6</code>) addressing on all interface add the following line to <code>/etc/sysctl.d/ipv6.conf</code> (or another file in <code>/etc/sysctl.d</code>): <pre>net.ipv6....
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules