Guide to the Secure Configuration of Fedora
Rules, Groups, and Values defined within the XCCDF Benchmark
-
Confidence level on Hardware Random Number Generator
Defines the level of trust on the hardware random number generators available in the system and the percentage of entropy to credit.Value -
Spec Store Bypass Mitigation
This controls how the Speculative Store Bypass (SSB) vulnerability is mitigated.Value -
Disable Recovery Booting
Fedora systems support an "recovery boot" option that can be used to prevent services from being started. The <code>GRUB_DISABLE_RECOVERY</code> co...Rule Medium Severity -
IOMMU configuration directive
On x86 architecture supporting VT-d, the IOMMU manages the access control policy between the hardware devices and some of the system critical u...Rule Unknown Severity -
Configure L1 Terminal Fault mitigations
L1 Terminal Fault (L1TF) is a hardware vulnerability which allows unprivileged speculative access to data which is available in the Level 1 Data Ca...Rule High Severity -
Force kernel panic on uncorrected MCEs
A Machine Check Exception is an error generated by the CPU itdetects an error in itself, memory or I/O devices. These errors may be corrected and g...Rule Medium Severity -
Verify /boot/grub2/user.cfg Permissions
File permissions for <code>/boot/grub2/user.cfg</code> should be set to 600. To properly set the permissions of <code>/boot/grub2/user.cfg</code>,...Rule Medium Severity -
Disable TIPC Support
The Transparent Inter-Process Communication (TIPC) protocol is designed to provide communications between nodes in a cluster. To configure the sys...Rule Low Severity -
Configure Microarchitectural Data Sampling mitigation
Microarchitectural Data Sampling (MDS) is a hardware vulnerability which allows unprivileged speculative access to data which is available in vario...Rule Medium Severity -
Ensure SMAP is not disabled during boot
The SMAP is used to prevent the supervisor mode from unintentionally reading/writing into memory pages in the user space, it is enabled by default ...Rule Medium Severity -
Ensure SMEP is not disabled during boot
The SMEP is used to prevent the supervisor mode from executing user space code, it is enabled by default since Linux kernel 3.0. But it could be di...Rule Medium Severity -
Enable Kernel Page-Table Isolation (KPTI)
To enable Kernel page-table isolation, add the argument <code>pti=on</code> to the default GRUB 2 command line for the Linux operating system. Conf...Rule Low Severity -
Configure the confidence in TPM for entropy
The TPM security chip that is available in most modern systems has a hardware RNG. It is also used to feed the entropy pool, but generally not cred...Rule Low Severity -
Disable merging of slabs with similar size
The kernel may merge similar slabs together to reduce overhead and increase cache hotness of objects. Disabling merging of slabs keeps the slabs se...Rule Medium Severity -
Protect Random-Number Entropy Pool
The I/O operations of the Linux kernel block layer due to their inherently unpredictable execution times have been traditionally considered as a re...Group -
guest_exec_content SELinux Boolean
default - Default SELinux boolean setting.
on - SELinux boolean is enabled.
off - SELinux boolean is disabled.Value -
Configure Speculative Store Bypass Mitigation
Certain CPUs are vulnerable to an exploit against a common wide industry wide performance optimization known as Speculative Store Bypass (SSB). In...Rule Medium Severity -
Enforce Spectre v2 mitigation
Spectre V2 is an indirect branch poisoning attack that can lead to data leakage. An exploit for Spectre V2 tricks the indirect branch predictor int...Rule High Severity -
Ensure debug-shell service is not enabled during boot
systemd's <code>debug-shell</code> service is intended to diagnose systemd related boot issues with various <code>systemctl</code> commands. Once e...Rule Medium Severity -
Disable vsyscalls
To disable use of virtual syscalls, add the argument <code>vsyscall=none</code> to the default GRUB 2 command line for the Linux operating system. ...Rule Medium Severity -
Non-UEFI GRUB2 bootloader configuration
Non-UEFI GRUB2 bootloader configurationGroup -
Verify /boot/grub2/grub.cfg Group Ownership
The file <code>/boot/grub2/grub.cfg</code> should be group-owned by the <code>root</code> group to prevent destruction or modification of the file....Rule Medium Severity -
Verify /boot/grub2/user.cfg Group Ownership
The file <code>/boot/grub2/user.cfg</code> should be group-owned by the <code>root</code> group to prevent reading or modification of the file. To...Rule Medium Severity -
Verify /boot/grub2/grub.cfg User Ownership
The file <code>/boot/grub2/grub.cfg</code> should be owned by the <code>root</code> user to prevent destruction or modification of the file. To pr...Rule Medium Severity -
Verify /boot/grub2/user.cfg User Ownership
The file <code>/boot/grub2/user.cfg</code> should be owned by the <code>root</code> user to prevent reading or modification of the file. To proper...Rule Medium Severity -
antivirus_can_scan_system SELinux Boolean
default - Default SELinux boolean setting.
on - SELinux boolean is enabled.
off - SELinux boolean is disabled.Value -
Set the Boot Loader Admin Username to a Non-Default Value
The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings. <br><br> To maximize the prote...Rule High Severity -
Set Boot Loader Password in grub2
The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings. <br><br> Since plaintext passw...Rule High Severity -
UEFI GRUB2 bootloader configuration
UEFI GRUB2 bootloader configurationGroup -
Verify the UEFI Boot Loader grub.cfg Group Ownership
The file <code>/boot/grub2/grub.cfg</code> should be group-owned by the <code>root</code> group to prevent destruction or modification of the file....Rule Medium Severity -
Verify /boot/grub2/user.cfg Group Ownership
The file <code>/boot/grub2/user.cfg</code> should be group-owned by the <code>root</code> group to prevent reading or modification of the file. To...Rule Medium Severity -
Verify the UEFI Boot Loader grub.cfg User Ownership
The file <code>/boot/grub2/grub.cfg</code> should be owned by the <code>root</code> user to prevent destruction or modification of the file. To pr...Rule Medium Severity -
Verify /boot/grub2/user.cfg User Ownership
The file <code>/boot/grub2/user.cfg</code> should be owned by the <code>root</code> user to prevent reading or modification of the file. To proper...Rule Medium Severity -
Verify the UEFI Boot Loader grub.cfg Permissions
File permissions for <code>/boot/grub2/grub.cfg</code> should be set to 700. To properly set the permissions of <code>/boot/grub2/grub.cfg</code>,...Rule Medium Severity -
Verify /boot/grub2/user.cfg Permissions
File permissions for <code>/boot/grub2/user.cfg</code> should be set to 600. To properly set the permissions of <code>/boot/grub2/user.cfg</code>,...Rule Medium Severity -
Set the UEFI Boot Loader Admin Username to a Non-Default Value
The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings. <br><br> To maximize the prote...Rule Medium Severity -
Set the UEFI Boot Loader Password
The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings. <br><br> Since plaintext passw...Rule High Severity -
zIPL bootloader configuration
During the boot process, the bootloader is responsible for starting the execution of the kernel and passing options to it. The default Fedora boot ...Group -
Ensure Solid State Drives Do Not Contribute To Random-Number Entropy Pool
For each solid-state drive on the system, run:# echo 0 > /sys/block/DRIVE/queue/add_random
Rule Medium Severity -
antivirus_use_jit SELinux Boolean
default - Default SELinux boolean setting.
on - SELinux boolean is enabled.
off - SELinux boolean is disabled.Value -
Do not allow ACPI methods to be inserted/replaced at run time
This debug facility allows ACPI AML methods to be inserted and/or replaced without rebooting the system. This configuration is available from kerne...Rule Low Severity -
Emulate Privileged Access Never (PAN)
Enabling this option prevents the kernel from accessing user-space memory directly by pointing TTBR0_EL1 to a reserved zeroed area and reserved ASI...Rule Medium Severity -
Disable kernel support for MISC binaries
Enabling <code>CONFIG_BINFMT_MISC</code> makes it possible to plug wrapper-driven binary formats into the kernel. This is specially useful for prog...Rule Medium Severity -
Enable support for BUG()
Disabling this option eliminates support for BUG and WARN, reducing the size of your kernel image and potentially quietly ignoring numerous fatal c...Rule Medium Severity -
Trigger a kernel BUG when data corruption is detected
This option makes the kernel BUG when it encounters data corruption in kernel memory structures when they get checked for validity. This configurat...Rule Low Severity -
Disable compatibility with brk()
Enabling compatiliby with <code>brk()</code> allows legacy binaries to run (i.e. those linked against libc5). But this compatibility comes at the c...Rule Medium Severity -
Disable the 32-bit vDSO
Certain buggy versions of glibc (2.3.3) will crash if they are presented with a 32-bit vDSO that is not mapped at the address indicated in its segm...Rule Low Severity -
Enable checks on credential management
Enable this to turn on some debug checking for credential management. The additional code keeps track of the number of pointers from task_structs t...Rule Low Severity -
auditadm_exec_content SELinux Boolean
default - Default SELinux boolean setting.
on - SELinux boolean is enabled.
off - SELinux boolean is disabled.Value -
Ensure Rsyslog Encrypts Off-Loaded Audit Records
Rsyslogd is a system utility providing support for message logging. Support for both internet and UNIX domain sockets enables this utility to suppo...Rule Medium Severity
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.