Skip to content
ATO Pathways
  Log In

Guide to the Secure Configuration of Red Hat Enterprise Linux 10

Rules, Groups, and Values defined within the XCCDF Benchmark

  • Verify Permissions On /etc/ipsec.conf File

    To properly set the permissions of /etc/ipsec.conf, run the command: 
    $ sudo chmod 0644 /etc/ipsec.conf
    Rule Medium Severity
    Show

  • Verify Permissions On /etc/ipsec.secrets File

    To properly set the permissions of /etc/ipsec.secrets, run the command: 
    $ sudo chmod 0644 /etc/ipsec.secrets
    Rule Medium Severity
    Show

  • Verify Group Who Owns Backup shadow File

    To properly set the owner of /etc/shadow-, run the command: 
    $ sudo chown root /etc/shadow-
    Rule Medium Severity
    Show

  • Disable DCCP Support

    The Datagram Congestion Control Protocol (DCCP) is a relatively new transport layer protocol, designed to support streaming media and telephony. T...
    Rule Medium Severity
    Show

  • net.ipv4.conf.default.arp_filter

    Controls whether the ARP filter is enabled or not. 1 - Allows you to have multiple network interfaces on the same subnet, and have the ARPs for ea...
    Value
    Show

  • Configure Accepting Default Router in Router Advertisements on All IPv6 Interfaces By Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_ra_defrtr</code> kernel parameter, run the following command: <pre>$ sudo sysct...
    Rule Unknown Severity
    Show

  • Configure Accepting Prefix Information in Router Advertisements on All IPv6 Interfaces By Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_ra_pinfo</code> kernel parameter, run the following command: <pre>$ sudo sysctl...
    Rule Unknown Severity
    Show

  • Configure Accepting Router Preference in Router Advertisements on All IPv6 Interfaces By Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_ra_rtr_pref</code> kernel parameter, run the following command: <pre>$ sudo sys...
    Rule Unknown Severity
    Show

  • Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysct...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sy...
    Rule Medium Severity
    Show

  • Configure Auto Configuration on All IPv6 Interfaces By Default

    To set the runtime status of the <code>net.ipv6.conf.default.autoconf</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net...
    Rule Unknown Severity
    Show

  • Configure Maximum Number of Autoconfigured Addresses on All IPv6 Interfaces By Default

    To set the runtime status of the <code>net.ipv6.conf.default.max_addresses</code> kernel parameter, run the following command: <pre>$ sudo sysctl -...
    Rule Unknown Severity
    Show

  • Configure Denying Router Solicitations on All IPv6 Interfaces By Default

    To set the runtime status of the <code>net.ipv6.conf.default.router_solicitations</code> kernel parameter, run the following command: <pre>$ sudo s...
    Rule Unknown Severity
    Show

  • Kernel Parameters Which Affect Networking

    The <code>sysctl</code> utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking...
    Group
    Show

  • Network Related Kernel Runtime Parameters for Hosts and Routers

    Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against cert...
    Group
    Show

  • net.ipv4.conf.all.accept_redirects

    Disable ICMP Redirect Acceptance
    Value
    Show

  • net.ipv4.conf.all.accept_source_route

    Trackers could be using source-routed packets to generate traffic that seems to be intra-net, but actually was created outside and has been redirec...
    Value
    Show

  • Disable RDS Support

    The Reliable Datagram Sockets (RDS) protocol is a transport layer protocol designed to provide reliable high-bandwidth, low-latency communications ...
    Rule Low Severity
    Show

  • net.ipv4.conf.default.arp_ignore

    Control the response modes for ARP queries that resolve local target IP addresses: 0 - (default): reply for any local target IP address, configure...
    Value
    Show

  • net.ipv4.conf.all.forwarding

    Toggle IPv4 Forwarding
    Value
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules